VaLO Zigbee 24V DRIVER 150W CCT with build-in Zigbee receiver

VaLO Zigbee-dimmable driver and receiver

LedStore Wireless Zigbee-compatible driver for 24V CCT-led strips. Max. load 150W.

This driver is special size, Long and narrow. Good for narrow indirect lighting shelves!

Driver can be installed to damp but covered places (IP21). With driver, you also need Zigbee wireless remote and/or WIFI-Zigbee HUB and Android/iOS device, to adjust colours and dimming. You can have multiple controllers for one remote and vise versa. Driver has easy terminals on both ends.

This driver is used for CCT (colour temperature) led strips and is not used commonly for single colour!

This remote works fine:

VaLO Zigbee CCT remotes

Is VaLO Zigbee compatible with other Zigbee devices?

Yes! If you have ie. Philips Hue HUB, you can use it with:

IKEA TRÅDFRI system, Google Home devices and softwares and naturally any other Zigbee device.

What is Zigbee?

Zigbee is wireless MESH RF-system, where every device is receiver and sender/repeater. This helps you to build and use system in bigger houses that has problems carrying RF signal thru long distances. Zigbee devices can be used freely with other Zigbee certified devices.

With LedStore VaLO Zigbee – Wireless lighting control, you can control lights with wireless wall remotes or Android/iOS devices, such as tablets and phones.

Zigbee is only complete loT (Internet of Things) solution — from mesh-network to universal standard, that allows smart things to communicate. Because devices create their own mesh network, signals alsways go thru.

Zigbee is standardised system that allows you to add any Zigbee alliance certified device to system and it seamlessly talks with other devices. Notable alliance partners are Google, Apple, IKEA, Amazon, Panasonic and Somfy.
Zigbee-producs are around the world in millions of homes. Our Zigbee certified devices use Zigbee 2.0 and some Zigbee 3.0 too and are always backwards compatible.

Measurements

Lenght: 370mm
Width: 43mm
Height: 30mm