Be the first to review this product
VaLO 24V DRIVER 100W with build-in RF receiver
VaLO series RF dimmable four-channel power supply for 24V LED light strip. Can be used wirelessly with VaLO series buttons or PUSH-DIM button. Suitable for single-color strips, W+RGB, RGB and CCT strips. Max. load per channel 25W when using all four channels. Max. load 100W per channel when using one channel, or 50W per channel when using two channels.
VaLO RF dimmable power supply
VaLO series RF dimmable four-channel power supply for 24V led strip lighting. Suitable for monochrome strips as well as W+RGB, RGB and CCT strips. RF receiver built-in, so for wireless dimming you only need a button to be paired with a driver. Max load per channel 25W when using all four channels. When using only one channel 100W or two channels, max load 50W per channel. The power supply must be installed in a dry place. The wiring must be carried out by a person authorised to do so.
Dimming of the power supply and colour adjustment of the strip shall be made by means of the VaLO series buttons. So order the correct dimmer button depending on the type of tape you are using e.g. (note: other options also available):
- W+RGB or RGB VaLO button
- CCT button
- Dimming button for monochrome strip
Dimensions
Length: 244mm
Width: 64mm
Height: 32mm
FITTING NOTE: When using RGB and W+RGB strip, please note the correct RGB wire order. R (red) and G (green) wires on the strip are in a different order than on the driver. That is, install the R, wire in position 1 and the G wire in position 2.
Our service
Please contact us if you need ready-to-install LED strip assemblies with controllers. We serve for custom-made projects at LedStore's LedShop.
Guarantee (year) | 5 years |
---|---|
Watt | 100.00 |
Dimensions | 244x64x32mm |
Voltage (V) | 24 |
Light Adjustment | CCT, RGBW, RGB |
Product height | 3.2 |
Product width | 6.4 |
Product depth | 24.4 |
Approved | CE, RoHS, IP21 |
IP Class | IP21 |
Muuta | Build-in RF receiver compatible with VaLO series buttons. |