Be the first to review this product
Surface mounted CCT LED PLAFOND 160 12W, IP54, dimmable, high CRI95
A surface-mounted ceiling light with adjustable color temperature (CCT) and moisture protection (IP54), the 160 provides bright illumination and is suitable for use as general lighting throughout your home due to its minimalist appearance.
Dimmable and moisture-proof (IP54), the surface-mounted plafond 160 provides a bright and sleek look that makes it ideal for general lighting throughout your home. The light has a flat surface, a departure from the convex shape of a traditional plafond. The height of the surface frame is 39mm. The surface plafond 160 is ideal for installation in stone houses, on concrete ceilings or on the surface of cavity slabs, for example. A small installation space for connectors is required.
This light is a good option for homes where discreet and unobtrusive lighting is desired. The light can be used throughout the house to create uniform lighting, allowing the architectural design of the space to be reflected. The light is damp-proof (IP54), so it can be used in damp areas and outdoors, such as carports. The light body is made of aluminium and powder coated in matt white. The diffuser is made of matt acrylic.
Technology
CCT 160, 12W surface plate gives 800 lumens. The LED circuits in the light are mounted directly on the body. This solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature ensures a long lifetime of 50,000h.
Colour rendering index (CRI) of 95 and excellent thermal conductivity. High quality components ensure that the light colour does not fade.
The pintaplafond 160 will not be affected by frost, rain or snowstorms if it is installed on the roof of a carport or terrace. The surface plafond 160 LED light is widely used as a replacement for spotlights for general lighting both indoors and outdoors. The light provided by the light is more uniform than a spotlight and is ideal for general lighting. In addition, the matt surface completely hides the LED circuits from view and provides a uniform light without sharp shadows.
The light colour can be selected from 3150K (warm white), 4000K (neutral white) and cool 5600K at the installation stage.
See here for installation examples and ideas
Installation
The light is surface mounted. To install, first remove the frame, prop it up and screw it to the ceiling using the screws and props for stone walls supplied. The frame is removed by pushing.
Each light is supplied with its own power supply with quick connector, which is integral with the light. In addition, there is a colour temperature switch for the light. The power supply has a quick connector for easy installation, which is connected to the mains power supply. The installation of the light is electrical work and requires adequate qualifications.
Dimming
Dimming is possible with TRIAC dimmers from the PRIMARY side. Suitable dimmers, which we have tested, can be found in Schneider's EXXACT and ABB's Impressivo series of dimmers, as well as our own wireless VaLO series. See more in our dimming section.
It is possible to connect up to 24 surface ceiling 160, 12W lights to the same dimmer, e.g. Schneider's EXXACT 315RC transistor dimmer (315W), and up to 7 to our own wireless VaLO series receiver. For more information on sliding colour temperature control, please contact us. You will need a power supply for wireless control, the size of which is determined by the combined power consumption of the lights. A wireless controller is also required for the colour temperature of the light.
Why choose CCT Surface Plafond 160?
- A clean and simple, flat-domed light.
- Good light output.
- Good colour rendering (CRI 95).
- Suitable for indoor and outdoor use.
- A quality light manufactured by LedStore with a 5-year guarantee.
- Can also be dimmed with low-cost conventional dimmers.
- Light is even, not bright in the centre and dim at the edges.
- A good option for general lighting throughout the home.
- Pintaplafondi 160 is CE, RoHS and SELV certified.
Guarantee (year) | 5 years |
---|---|
Colour rendering (CRI ±3) | 95 |
Model | Plafond160 SURFACE |
Lumen | 800.00 |
Light angle | 110 |
Color | White |
Voltage (V) | 230 |
Color temperature (K) | 3150, 4000, 5600 |
Light Adjustment | CCT |
Watt | 12.00 |
Lifespan | 50000 |
Dimensions | 160x39 |
Product diameter | 16 |
Product height | 16 |
Product width | 16 |
Product depth | 3.9 |
Approved | CE, RoHS, IP54, although part of the products are labelled IP21 |
Energy class | B (185lm/W) |
Muuta | Driver inside the body, dimmable |
IP Class | IP54 |
Chainable | Yes |
Mounting Method | Surface mounting |
This LED PLAFOND 160 is surface mounted and covers nicely the typical hole on the ceiling. Driver inside the body. First attach the frame to the ceiling, then connect the wires (230V) and the just push the light to the frame. The light stays cool, so it can be installed on wood or plaster. Installing lights is electrial work.