Be the first to review this product
Recessed LED downlight water resistant (IP44) kit 8pcs 3W dimmable spots, white
Dimmable and moisture-protected LED light set with 8 bulbs (white or silver). The color rendering index is over 85 and the light output corresponds to 15W halogen per bulb.
Humid room led spotlight kit
With this spotlight set you can beautifully highlight the tiling of your bathroom. The spots are ideal for creating atmospheric lighting as they are compact and dimmable. This spotlight can also be installed on the floor of a terrace (order the IP65 model) or as a staircase light without fear of you or your pet burning their toes (operating temperature below 50 degrees). We do not recommend this light for general lighting, but rather for accent lighting and pathway lighting, although it is efficient for its size.
Our secret ingredients are Cree's latest LED chips, with a colour rendering index of over 85 and excellent thermal conductivity. One bulb is equivalent in luminous intensity to 15W halogen, which in lumens is 200.
The same model is also available in silver and for indoor use a directional spotlight series is available in white and silver. The IP65 model, well protected for very humid environments, is available on request. All models are available in 3000K (warm white) and 4000K (neutral white).
Click here for installation examples and inspiration pictures
Installation is possible in very low spaces. The height of the lamp is only 45mm and the diameter of the mounting hole is 36mm. The size of the power supply is 110x50x35mm. This allows installation on a standard ceiling structure with only 48x48mm of board and 13mm of plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the light to prevent the insulation from sagging.
LED spot kits include the correct size power supply, which depends on the size of the kit i.e. 3-4pcs kits, 5-6pcs kits and 7-8pcs kits all require a different power supply. Removing one bulb cuts the voltage and the lights go out. Therefore, do not leave any part of a set of lamps uninstalled, as this is likely to break the set. If you find that you have ordered the wrong number of bulbs in a set, please contact us and we will correct the problem. Led spot set spots have approximately 1.4m of cable from the spot to the power supply.
The power supply should be placed in a dry area. If the installation is made in a bathroom, the power supply is usually installed in a drop ceiling (we recommend to install a service hatch in the ceiling as well). If the installation is made in a recessed ceiling or outside, the power supply and the cable distributor must be protected from moisture, for example by placing them inside a moisture-proof box. The power supply is fitted with a black test lead which is posted when the power supply is connected to the mains. The lamp does not have a plug.
You can count on us
A superior five-year warranty on the LED and a three-year warranty on the power supply are something. All thanks to LedStore's decisively superior technology. All our lights are CE and RoHS approved.
Each light comes with a dimmable power supply. We have moved the power supply to the outside of the light so that it does not unnecessarily heat up the light. The separate power supply also keeps the size of the light small. The power supply of the light is dimmable with TRIAC dimmers from the PRIMARY side and works with home automation systems such as KNX and Talomatti. Suitable dimmers can be found in our shop:"Led dimmers"
For example, LED bulbs for LED lights:
ABB (former Ensto) Jussi model 6523U
Schneider (ex strГ¶mfors) transistor controller 315W/VA, EXXACT.
|Colour rendering (CRI ±3)
|Installation hole 36mm, Lamp Diameter 45mm, lenght 45mm
|CE, RoHS, IP54
|Driver Included, dimmable
Can be installed in a very small spaCE. The height of one led spot is 45mm. The cut out size is 36mm. This IP44 LED LIGHT SET fits to typical CEiling structure where there is 48x48mm frame and 13mm plaster board. We recommend you to install plaster board or such on to of the spot if there is a possibility thta the insulation will press the led spot down.
IP44 LED LIGHT SET comes with a dimmable driver. Driver does not fit in from the light holes, so you need to make a maintenanCE hole into the CEiling or nearby wall for maintenanCE. All sets are build to order, so the have the right size driver included depending on the amount of lights. Measurements of the driver are 110x50x35mm. There is a cable of 1,4m between each light and the driver. Driver has a black test cable, taht should be removed when installed to main (230V).
ALWAYS INSTALL ALL LIGHTS ORDERED TO THE DRIVER!
The 3-4 set, 5-6 set and 7-8 set all have a different driver, so if not all lights are installed, the driver and the lights might break. Taking out one light will cut off light to other laps as well. If you descover you have ordered the wrong set or want to plaCE the lights you ordered in a different way, please be in contact and we will sort you out.
Driver is not water resistant, so it should be installed to a dry place.
Driver can be ordered with plug (special order) or IP65!