LED downlight — ROUND, IP44, adjustable & dimmable 9W, white, high CRI97, 3000K

LED PYRERE 033 (white, 3000K) is dimmable and moisture-proof (IP44). We use high quality Citizen LED circuits with a CRI of 97, and the colours are reproduced as they should be. The light in the luminaire comes beautifully from a single point. The luminaire is available in both 3000K (warm white) and 4000K (neutral white), with this luminaire being 3000K.

LED PYREREÄ 033 is suitable for general lighting from private homes to public spaces. The LED PYÖREÄ 033 is equivalent to a 50W halogen luminaire. Thanks to its directionality, the luminaire is also suitable for sloping ceilings.

The luminaire is IP44, which means that it is splash-proof. If you want to be sure that the luminaire will last the promised 50,000 hours, then due to its directionality we do not recommend it for bathroom ceilings connected to saunas, where water vapour can enter the installation space between the luminaire frame. The transformer of the luminaire is not moisture-proof.

LED PYRERE 033 is a flush mounted luminaire in cast aluminium with the LED circuit directly fixed to the frame. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature guarantees a long lifetime of 50,000h and we grant a 5 year warranty on our manufactured luminaire! The luminaire is also available in silver colour. The LED module of the luminaire is removable and replaceable.

<img src="{{media url="wysiwyg/Led_Spots.png"}}" alt="Led Spots" />

Click here for installation examples and photos

Installation

The luminaire is directional, 0-28 degrees. The luminaire is very low, only 55-60mm high! The luminaire will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the luminaire to prevent the insulation from sagging. The diameter of the mounting hole is 76-80mm.

Each luminaire is supplied with its own chained power supply which fits through the mounting hole into the mounting space. By moving the power supply away from the luminaire, we prevent the power supply from heating up the luminaire, and we can keep the size of the luminaire small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the luminaire. There is a quick connector between the luminaire and the power supply to facilitate installation.

Dimming

The luminaire can be dimmed with a wireless dimmer or TRIAC dimmers, from the ENSIO side and they also work with home automation such as KNX. Suitable dimmers can also be ordered from us, "Led dimmers"

They work well for example:

• ABB (former Ensto) Jussi 6523U
• Schneider (ex strömfors) transistor controller 315W/VA (EXXACT)!

All our lamps are CE and RoHS approved.

NOTE! There is still a CRI85 model of the luminaire available, where the light comes from 3 points and is IP21!