Controller for cabinet or sliding door sensor
Motion detecting infrared motion sensor package control unit or controller.
Can be used in standard or sliding door cabinets. 1 to 3 sensors can be connected to the controller. The controller is connected to a 12-24V DC transformer.
(HAND) swing function:
When the hand/door is moved 10cm from the sensor, the sensor will switch on the lights
When the hand is moved 10cm away from the sensor again, the sensor turns off the lights
(DOOR) door function:
When there is no detectable presence in the area of the sensor (1-3), the lights turn on.
When an object is detected by the connected sensors (1-3), the lights go out
when the motion detector package is activated (when the detectors are not activated), the lights go off (when the detectors are not activated)
(The product is also known as cabinet switch, door switch).
Motion detecting infrared motion sensor package control unit or controller.
Can be used in standard or sliding door cabinets. 1 to 3 sensors can be connected to the controller. The controller is connected to a 12-24V DC transformer.
(HAND) swing function:
When the hand/door is moved 10cm from the sensor, the sensor will switch on the lights
When the hand is moved 10cm away from the sensor again, the sensor turns off the lights
(DOOR) door function:
When there is no detectable presence in the area of the sensor (1-3), the lights turn on.
When an object is detected by the connected sensors (1-3), the lights go out
in addition to this, you will need a motion sensor package with sensors 1-3
(The product is also known as cabinet switch, door switch).
During the installation phase, the sensors must first be covered when the power is switched on for the sensor to start working correctly.
Installation video on YouTube as: IR motion sensor for sliding door cabinet 12-24V
- Delivery status Out of Stock
- Brand Ledstore
- Breadcrumbs Home LED accessoriesMotion detectors and light sensorsMotion detectors Controller for cabinet or sliding door sensor
- Category Motion detectors
- SKU door-controller
- Wattage 192
- Size 95*37*20
- Length of the package 7.5
- Height of the package 3
- Width of the package 8.2
- Approval CE, RoHS
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?