1m LED STRIP SMD 2835, 14.4W/m (72W/5m) 24V, IP21, high CRI90, 3000K

LED light ribbon - HELMEILE

Our Helmeile light strip has a luminous intensity of 14.4W/m and 120 LED circuits per metre. This makes the light uniform enough for indirect lighting and countertop lighting, for example. When mounted on an aluminium profile, there is only a slight spotting effect. When indirectly illuminated through a wall, the light is uniform. The CRI of the strip light is over 95, which is excellent and suitable for use in home lighting. This led strip light 24V version is more resistant to long feeds, without light fade.

If you want a custom made led strip light or a custom made profile with your own dimensions, try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF operation. For one or more levels!
https://ledstore.fi/mittatilaus

About

In the Helmeile strip light we use the MD 2835 led chip with a colour rendering index of over 95. This led strip light is dimmable and suitable for indoor use.Our led strip light is easy to attach with the 3M very strong adhesive tape that comes with it.This led strip light 14,4W/m is equivalent in light output to almost 120cm fluorescent tube, so you will save a lot of electricity with this solution!

The Led strip is available in two different light colours. The halogen equivalent 3000K and the slightly more modern neutral white 4000K.

Installation

In addition to the Led strip light, a power supply and an aluminium profile are required for installation, as well as the operating switches.

The Led strip comes in a 1m roll and can be cut to size in increments of 5cm. The strip has clear markings to make cutting easier. We recommend soldering the light strips together, as we have found that the quick-release fasteners loosen over time and loosening causes the lights to flash. There are pre-soldered connectors at both ends of the light strip, which can be used depending on the destination.

We recommend powering from both ends if the light strip is more than 10m continuous length, this will prevent light loss and give an equally bright light from both ends. the LED strip should always be attached to an aluminium strip to allow excess heat to escape from the LED circuitry. This will extend the life of the led strip light and keep the warranty valid. Aluminium profiles can be ordered from our online shop, where they are available in several different types.

Led strip light 24V works well with solar power and boats that use 24VDC, then a separate power supply is not needed. In other cases, please order a suitable 24V power supply for the strip light (e.g. 10m 14,4W is 72W in total, so any 24V power supply over 80W will work).

Connecting plugless transformers is electrical work and requires adequate qualifications. We are happy to help with any installation questions.

Dim

For dimming your led strip light you can use either a traditional rotary wired dimmer or our VaLO RF series wireless dimmer. When using a conventional rotary dimmer, the transformer of the LED strip light must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the luminaire, but the luminaire is powered by a constant current.

In the case of a smart home, a Zigbee transformer and controllers for wireless control are chosen. In Zigbee transformers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip light and the power supply. You can then control the strip light with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use an LED strip light only for traditional applications when you can make a light from almost anything? Create your own wall light by bending the LED strip light and the aluminium profile to the shape you want, or by attaching the LED strip light to any other heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip light. A good design is half the job. We are happy to help you with your design, and we make custom-made led strip lights in the LedStore's LedShop.