1cm CCT LED strip — SOLO SLIM - 7,2W/m, 24V, IP65
CCT LED strip — Solo SLIM - 7,2W/m, 24V, IP65
The Solo 7,2W/m light strip can be adjusted between 2700K and 6500K. The SOLO SLIM strip is, as its name suggests, only 5mm narrow! The colour rendering index of the strip is 94-95 which means that colours are reproduced well (colours are best reproduced with 4000K white light as there is no yellowish or bluish tint involved). The Solo 7.2W/m ribbon is very uniform and efficient (795 lumens per meter) and has 640 LED circuits per meter. This LED strip is dimmable and colour control is available by ordering a VaLO RF or Zigbee (CCT) pushbutton and receiver (CCT).
If you want a custom made led strip or a custom made profile with your own dimensions try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
Be the first to write a review!
By rating you will be entered into a prize draw for a €50 gift voucher.
WHAT IS CRI, THE COLOUR RENDERING INDEX
High quality LED lights also have a high colour rendering index, or CRI. A good colour rendering index (CRI) for home use is above 90, and nowadays many market lights are unfortunately closer to 80.
CRI tells you how well an LED light displays colours as they should be. For designers and architects, as well as interior designers, it should be one of the most important considerations. Make sure the lighting is perfect so that your artwork is what it is meant to be.
Colour rendering index
The colour rendering index is expressed as a number on a scale from zero to 100, where 0 = no colour rendering and 100 = full colour rendering. The colour rendering index of LED lights is also known as Ra, which is measured on a smaller scale than CRI. This Ra value does not include red tones or skin tones, for example, so it is a 'glossed' figure for the true quality of an LED light.
RA value
The Ra value measures the reproduction of colours using eight different reference colours. CRI takes into account the wider (15) wavelength range, including reds and other warm colours.
The Ra value is calculated by cutting the wavelength range, weighting the blue and violet tones, and calculating the weighted average of R numbers 1-8.
Excluded from the Ra value are, for example, the colour rendering of bright reds, yellows and greens, and shades close to skin tone. These are described by R-values between 9 and 15. The following is a picture of a measurement result that easily confuses the consumer.
This measurement is from a 9W CCT Led spot
Read more on this topic:
Colour rendering of LEDs - What is the difference between CRI and Ra-value?