Motion PIR sensor switch with light level sensor, recessed or surface mounted wall/ceiling installation, IP20

This motion sensor (PIR) can be used to turn on lights inside. It works best in spaces where people are most often just passing by, such as closets, vestibules, storage rooms, technical rooms and pantries. Preferably ceiling mounted, but wall mounting is also possible. The PIR sensor switches the lights on when it detects movement in the beam area and switches the lights off after a certain time after the last detected movement. The on-time is adjustable between 10 seconds and 30 minutes.

Motion detection is done by infrared, which works by turning on the lights when the sensor detects a temperature (heat) in the beam area that is different from that of the wand. We do not recommend installation near an air conditioner, air source heat pump or radiator, as heat variation against other background conditions will cause the lights to turn on.

The motion sensor also includes a twilight sensor, which makes this a good choice for pathway lights and night lighting, turning on the lights from motion only when the twilight level is at a certain level. So, for example, certain lights will come on when motion is detected, but only at dusk. The light level can be adjusted from a near-dark 3lx level to a full brightness of 2000lx.

• Detection radius: 360В°.
• Power: 220V - 240V AC, 50-60Hz
• Maximum load: 800W (incandescent lamps), 400W (energy saving and LED lamps)
• Detection distance: max. 3m
• Installation height: 2.2m - 4m
• Operating temperature: -20В°to +40В°
• Time delay: min. Min. 10sec. В± 3sec. to max. 10sec. to max. 30min. В± 2min. (adjustable)
• Ambient light level: <3-2000lx (adjustable)
• Protection class: IP20
• Power consumption: 0.5W
• Operating humidity: <93%RH
• Motion detection speed: 0.6 - 1.5m/s