Be the first to review this product
Microwave sensor switch with light level sensor, surface mounting IP20
A microwave sensor turns on the lights when it detects movement within the detection beam area and when the light level is at the desired level. For example, whenever it detects movement or whenever it detects movement and it is dark. The sensor's radar also detects movement through thin wood and glass surfaces, as well as thin walls and ceiling materials. Installation is recommended to be done on the ceiling, where the sensor turns on the lights when it detects movement and turns off after the last detected movement. It works more efficiently than infrared sensors.
You can adjust the detection beam detection range, the light level at which the lights turn on, and the time the lights stay on after the last detected movement.
The microwave sensor turns on the lights when it detects movement within the sensing range and when the light level is at the desired level. For example, whenever motion is detected or whenever motion is detected and it is dim. The sensor's radar also detects motion through thin wooden and glass surfaces and thin walls and roofing materials. It is recommended to install the sensor on the ceiling, where it will switch on the lights when it detects movement and switch off after the last movement detected. Works more efficiently than infrared sensors.
How to set the microsensor to work:
- Set the desired light level at which the motion sensor turns on the lights. If you want the lights to turn on in daylight, set the sensitivity to 2000 lux (the lights will turn on in light below 2000 lux) and if you want the lights to turn on in darkness, set the sensitivity to 3 lux.
- Adjust the distance of the detection beam, taking into account that the detection beam will pass through thin wall structures, and position it so that it does not turn on lights in the next room or adjust the detection beam so that it does not.
- Adjust the time delay, i.e. the time the lights are on after the last detected movement.
Specifications of the microwave sensor:
- On after last detected movement min. 10secВ±3sec / max. 12minВ±1min (adjustable)
- Installation height 1,5 m - 3,5 m
- Detection radius 1m-9m (adjustable)
- Detection range 360 В°
- Brightness adjustment 3 lx-2000 lx
- Ignition delay 0,6 - 1,5 m/s
- Protection class IP20
- Operating temperature -20В°C ~ +40В°C
Guarantee (year) | 2 years |
---|---|
Model | MOTION-microsensor-SURFACE |
Watt | 300.00 |
Dimensions | 45mm, radius 96mm |
Product diameter | 9.6 |
Product height | 4.5 |
Product width | 9.6 |
Product depth | 9.6 |
Energy class | D (135lm/W) |
IP Class | IP20 |
Mounting Method | Surface mounting |