Be the first to review this product
Microsensor motion switch for 12-36V or 230V led lights
Approach sensor that turns on LED lights. The lights turn off with a delay after the last detected movement. Perfect for controlling lights in e.g. WC rooms or closets.
Motion-activated approach sensor for on/off LED strips. It also works through a thin plate, e.g. mounted in a false floor or inside a cabinet. The voltage of the driver is selected as either 12-36V or 230V and the selection is based on the voltage of the light to be connected to it, e.g. 12-36V driver for LED strips and 230V driver for conventional ceiling lights.
- For low current lights, a 12V-36V driver block connected to the low current side, e.g. between the strip and the driver. Maximum load 96-288W.
- For 230V high current lights, a control block for connection on the high current side, i.e. between 230V and the light. Maximum load 500W.
Detection distance 3-20 m and detection range 200 degrees. The detector is positioned so that it detects movement in the desired direction. The start-up time is manually adjusted from 1 second to 10 minutes from the last detected movement.
Wireless | VaLO RF |
---|---|
Guarantee (year) | 5 years |
Watt | 500.00 |
Dimensions | 95*37*20mm |
Product height | 9.5 |
Product width | 3.7 |
Product depth | 2 |
Approved | CE, RoHS |
IP Class | IP20 |