LED STRIP SMD 3528, 17W/m (85W/5m) 24V, IP21, high CRI97, 3500K

In stock 8
Only 8 left
SKU
strip17W-IP21-3500

TASAINEN led-nauha 17W/m (5m rulla) jossa on huikeat 240 led-piiriä metrillä ja värintoistoindeksi on huikeat CRI97. Tämä led-nauha on himmennettävä ja sopii käytettäväksi kuivissa tiloissa (IP21). Muovikannelliseen profiiliin asennettuna roiskeveden pitävä ja pölyltä suojassa.

Mikäli haluat erikoismittaista led nauhaa tai mittatilaus profiilia omilla mitoilla niin kokeile mittatilauslaskuriamme!
Laskurilla lasket hinnan erillaisille tarpeille langattomalla ohjauksella tai ON/OFF käyttöön. Yhdelle tai useammalle tasolle!
https://ledstore.fi/mittatilaus

€119.00
LED STRIP SMD 3528, 17W/m (85W/5m) 24V, IP21, high CRI97, 3500K is available to buy in increments of 1

TASAINEN LED strip light 17W/m

Our TASAINEN LED strip has a luminous intensity of 17W/m and a staggering 240 LED circuits per metre. This makes the light very even. Even with a low aluminium profile, there is no visible spotting and the light is uniform. In the flat light strip we use SMD 3528 led circuitry with a colour rendering index of a staggering CRI97. The light does not flicker or yellow but has a natural appearance. This led strip is dimmable and suitable for use in dry areas (IP21). The 17W/m LED strip is easily the equivalent of a 120cm fluorescent tube, so you'll save a lot of electricity!

Choose from halogen equivalent 3000K, slightly cooler beautiful 3500K and neutral white 4000K. Thanks to the high colour rendering index, all shades reproduce the colours of the surroundings well.

If you want a custom made LED strip or a custom made profile with your own dimensions, try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/mittatilaus

Installation

The LED strip comes in 5m rolls and can be cut to size every 2,5cm. The tape has clear markings to make cutting easier. We recommend soldering the strips together, as we have found that the quick connectors loosen over time and loosening causes the lights to flash. Both ends of the tape have pre-soldered connectors that can be used depending on the destination. We will be happy to help with any installation questions.

We recommend powering from both ends if the strip is more than 10m in a continuous length. This prevents light loss and provides equally bright light from both ends. Both ends can be supplied by a single driver if a thin wire is run alongside the profile. The actual power consumption of this strip is 20W/m, which should be taken into account when sizing the driver. An electrician is good at this kind of work.

Our LED strip is easy to fix with the 3M very strong adhesive tape on it. The LED strip should always be attached to an aluminium strip so that excess heat is conducted away from the LED circuit. This will prolong the life of the led strip. Aluminium profiles can be ordered from our online shop, where they are available in a variety of different types.

The LED strip works well with solar power, boats and cars that use 24VDC, then a separate power supply is not needed. In other cases, order a power supply here: power supplies.

Dimming

To dim the LED strip you can use either a traditional rotary wired dimmer or our VaLO RF series wireless dimmer. When using a rotary conventional dimmer, the driver of the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is powered by a constant current.

In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use an LED strip only for traditional applications when you can make a light from almost anything? Create your own wall light by bending the LED strip and the aluminium profile into the shape you want, or by fixing the LED strip to another heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make custom-made LED strip lighting at LedStore's LedShop.

Helmeile 12V vs. Flat 24V

Helmeile Flat
Voltage 12V 24V
max. length from one end at voltage 5m 10m
Power 14,4W/m 17W/m (20W/m)
Amount of light (lumen) per metre 1000 1200
Number of LEDs per metre 60 240
strip cut points 5cm 2,5cm
Colour rendering index, CRI 90 97

More Information
Guarantee (year) 3 years
Colour rendering (CRI ±3) 97
Model STRIP17CRI-IP21
Lumen 6,000.00
Voltage (V) 24
Color temperature (K) 3500
Watt 17.00
Lifespan 35000
Dimensions 12x3mm, 5m roll
Product height 500
Product width 1.2
Product depth 0.3
Approved CE, RoHS, IP21
Energy class B (185lm/W)
Muuta 3M tape on backside, HIGH CRI, RA 97!
IP Class IP21
Customer Reviews
Customer Questions
No Questions
Did you find what you were looking for?

Strip should ALWAYS be installed on aluminium profile for the led strip to cool down properly. Incorrect installation will void warranty.


Due to the led circuits are closely layed we have noticed and strongly recommend you to feed the power from both ends of the strip. This way you minimize the voltage drop and ensure that the whole strip illuminates even if there occurs light breaks during the assembly or during use. In addition with led strip you need also driver / s and aluminium profile.

Ratings & Reviews

Be the first to review this product

We found other products you might like!
© Lamppukauppa Led Store Oy. 2022 All Rights Reserved