LED STRIP PRO, 12,4W/m (62W/5m), 24V, water resistant IP65, high CRI95-3000

LED strip 24V PRO

In PRO LED strip we use a LED circuit with a colour rendering index of 95. This LED strip is dimmable and moisture-proof to IP65 (anti-fading surface). Our LED strip is easy to fix with the 3M very strong adhesive tape. PRO led strip 12,4 W/m illuminates 1116 lm/m, so it is very energy efficient! The strip comes in a 5m roll. Unlike our other led strips, this strip has no connectors, so it is best suited for bespoke projects where cables and connectors are installed separately and the driver installation is fixed.

For all types of lighting

Our PRO LED strip has an input power of 12.4W/m and a luminous flux of 1116 lumens/m. The strip is narrow and low compared to our other strips, and the high-power LED circuits are not very close together, making it easier to connect the strip. The strip has 60 LED circuits per metre. We give a 3 year warranty on the PRO tape.

Installation

In addition to the strip, the installation of the LED strip requires a driver, an aluminium profile and operating switches.

PRO LED strip 24V comes in 5m rolls and can be cut to size in 10 cm increments. The strip has clear markings for easy cutting and the cut points have copper dots for soldering. We recommend soldering the strips together. We are happy to help with any installation questions.

We recommend powering from both ends if the strip is more than 10m in a single piece. This prevents light loss and provides an equally bright light from both ends. The Led strip should always be attached to an aluminium (or other metal) strip to allow excess heat to be conducted away from the LED circuit. This will prolong the life of the led strip, and keep the warranty valid. Aluminium profiles can be ordered from our online shop, where they are available in a variety of different types.

LED strip 24V works well with solar power, boats and cars that use 24VDC, then a separate power supply is not needed. In other cases, order a suitable 24V power supply for the strip (e.g. 2.5m*12.4W strip=31W, but always add a minimum of 10%, so 2.5m would require a minimum of 35W driver).

The installation of unplugged drivers is electrical work and requires adequate qualifications. We are happy to help with any installation questions.

Dimming

To dim the LED strip, you can use either a traditional rotary wired dimmer or our VaLO RF series wireless dimmer. When using a conventional rotary dimmer, the driver of the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is powered by a constant current.

In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Light colour temperature

3000 kelvin, warm white. Also available in 4000K neutral white. We reserve a 100 kelvin range for product batches.

Create your own lamp

Why use LED strip only for traditional applications when you can make a light out of almost anything? Create your own wall light by bending the LED strip and the aluminium profile to the shape you want, or by fixing the LED strip to another material that conducts heat well. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make custom-made LED strip lighting at LedStore's LedShop.