Be the first to review this product
LED outdoor wall light fixture — CUBIC OUT 2, water resistant IP55, up and down lights, 2x3W, 3000K
Wall CUBIC 2 provides light both upwards and downwards, forming a beautiful symmetrical bow on the wall. When installed on a covered balcony or terrace, the Light provides pleasant indirect light through the ceiling.
The LED wall CUBIC OUT 2 has a sleek and modern design. Wall CUBIC OUT 2 provides light both upwards and downwards. The light forms a beautiful, symmetrical bow on the wall. When installed on a covered balcony or terrace, the light provides a pleasant indirect light through the roof. Ideal for modern buildings.
The light is equipped with 3 pcs 1W Creen power LEDs both up and down. The leds are perfect for Finnish weather, because the led likes cold (in cold weather the led burns brighter and lasts longer). The light output of the wall CUBIC OUT 2 is equivalent to about 2x15W halogen, so the light output is about 200 lumens (per direction). The colour of the light is the familiar shade of 3000K, which is a warm white light.
The light is 100mm deep and has sides of 100x100mm. The surface of the light resembles sandblasted metal, but is weatherproof, powder coated and grey in colour.
See here for installation examples and ideas
The power supply is located in the body and the light only needs to be supplied with 230V normally. Installation is easy. The back plate of the light is first fixed to the wall, then the wires are connected, after which the light is placed on the back plate and fixed in place with two screws. Installation instructions are included in the package.
The same series is also available in pillar light models; one-way, and two-way in two different sizes, short and long. In addition, there is the wall light model CUBIC out, which gives light in one direction.
Protection class IP55. Our lights are RoHS and Ce approved.
The light can be seen in our warehouse.
|Guarantee (year)||3 years|
|Colour rendering (CRI ±3)||80|
|Color temperature (K)||3000|
|Approved||CE, RoHS, IP55|
|Energy class||B (185lm/W)|
Driver in inside the body, so installation like any other light. First attatch the pack disk on the wall, then connect wires and lastly install the light tto the back disk. Installation manual and all this needed come with the light.