Be the first to review this product
LED downlight — SQUARE SQ033W, CCT 2900-4000-5300K,dimmable, tiltable 9W, IP44 WHITE, high CRI98
LED SQUARE SQ033W CCT (white) 9W Light is dimmable and moisture-proof (IP44). The color rendering index (CRI) of the Light is 98 (full spectrum). The Light has an adjustable light temperature of 2900-4000-5300K. The Light has a light output equivalent to a +50W halogen.
LED SQUARE SQ033W CCT (white) is dimmable and damp-proof (IP44), also from behind. As LED circuit we use high quality LED circuits with a colour rendering index (CRI) of 98 (full spectrum!) and the colours are reproduced as they should be. In the light, the light comes beautifully from a single point. The light is also available in brushed silver and black.
LED SQUARE SQ033W CCT is suitable for general lighting applications from private homes to public spaces. The luminous intensity of the LED SQUARE 033 is equivalent to at least 50W halogen, +600 Lumen. The light has an extra lens for light equalisation, which, when dimmed, produces 750 lumens.
A 15W version is also available for offices and high spaces.
The light has an adjustable light temperature of 2900-4000-5300K with a switch, so you can choose the right colour for your interior. Even change according to the seasons!
If you want to adjust the colour temperature of the light at any time without a ladder, you will need CCT controllers (e.g. for a max 100W group):
- VaLO RF: VaLO RF 100W driver and VaLO RF CCT wireless push-button.
- VaLO Zigbee: VaLO Zigbee 100W driver and VaLO Zigbee CCT wireless button.
- Wireless control: 100W 24V driver and embeddable pushbutton in the box.
Please note that for group control, the Valasim's own driver will be omitted and replaced by a larger group driver. As the power requirement decreases, the driver will be increased by 25%, i.e. 6x9W CCT spots will need a minimum of 68W driver. The driver can always be much larger.
The light is IP44, i.e. the light is splash-proof, also towards the rear. The driver of the light is not splash-proof, but can withstand outdoor eaves.
LED SQUARE SQ033W is a flush mounted light in cast aluminium with the LED circuitry mounted directly on the body. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature and the high quality LED circuit guarantees a long lifetime of 50,000h and we grant a 7 year warranty on our manufactured light!
The LED module of the light is removable and replaceable.
See here for installation examples and ideas.
The light can be oriented from 0-27 degrees.. The light is very low, only 50-55mm high! The light will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the light to prevent the insulation from sagging. The diameter of the mounting hole is 76-80mm.
Each light is supplied with its own chained power supply which fits through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, and we can keep the size of the light small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the light. There is a quick connector between the light and the power supply to facilitate installation. The light colour change is made by the switch on the power supply. The light must be switched off before changing colour, otherwise the light will be damaged.
The light can be dimmed with a wireless dimmer or TRIAC dimmers, from the PRIMARY side and they also work with home automation such as KNX. Suitable dimmers can also be ordered from us, "Led dimmers"
They work well for example:
- ABB (former Ensto) Jussi 6523U
- Schneider (ex strГ¶mfors) transistor controller 315W/VA(EXXACT)!
- VaLO Triac dimmer with remote control option
All our lights are CE and RoHS approved.
|Guarantee (year)||7 years|
|Colour rendering (CRI ±3)||98|
|Color temperature (K)||Adjustable CCT|
|Dimensions||Lenght 50mm, installation hole 75-80mm|
|Approved||CE, RoHS, IP44|
|Energy class||B (185lm/W)|
|Muuta||Dimmable, driver included, tilt 0-28 degrees, 3 Colour temperatures in one!|
Led SQUARE 033 CCT (White) is very low, only 50mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 75-80mm in diameter.
All led spots come with driver that fits in from the installation hole. By having a separate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamp and the driver to make installation easy. Driver has chaining ability (2 inputs) and quick connectors
This light has adjustable white colour temperature with 3 steps: WW 2700K- DW 4000K- CW 5300K. Always turn power off before changing colour, otherwise you will damage the fixture.
Ratings & Reviews
- SQ033 CCT Led lights 8 pcs SET with control
- SQ033 CCT Led lights 6 pcs SET with control