Be the first to review this product
LED downlight — SQUARE SQ023, IP54, CCT 2700-4000-5300K,dimmable 15W, BRUSHED, high CRI98
LED SQUARE 023 (brushed) 15W Light is dimmable and moisture-proof (IP54). The color rendering index (CRI) of the Light is 98 (full spectrum). The Light has an adjustable light temperature of 2700-4000-5300K. The Light has a light output equivalent to +50W halogen.
LED SQUARE 023 (brushed) 15W is dimmable and moisture-proof (IP54), also from behind. This is a more efficient version of our popular light for demanding applications. As LED circuit we use high quality Citizen LED circuits with a colour rendering index (CRI) of 98 (full spectrum!) and the colours are reproduced as they should be. In the light, the light comes beautifully from a single point. The light is also available in black and white.
LED SQUARE 023 is suitable for general lighting applications from private homes to public spaces. The LED SQUARE 023 has a light output equivalent to at least 75W halogen, +1000 Lumen. The light has an extra lens with light equalisation, which when removed, provides 1250 Lumen.
A 9W version of the light is also available for basic use.
The light has an adjustable light temperature of 2700-4000-5300K with a switch, so you can choose the right colour for your interior. Even change according to the seasons! If you want to adjust the light wirelessly without a ladder, you need a VaLO driver and a wireless button.
The light is IP54, which means it is splash-proof, even from behind. The driver of the light is not splash-proof, but can withstand outdoor eaves.
LED SQUARE 023 is a flush mounted light in cast aluminium, with the LED circuitry mounted directly on the body. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature and the high quality LED circuit guarantees a long lifetime of 50,000h and we grant a 7 year warranty on our manufactured light!
The LED module of the light is removable and replaceable.
Click here for installation examples and photos
The light has a solid body. The light is very low, only 50mm high! The light will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the light to prevent the insulation from sagging. The diameter of the mounting hole is 78mm.
Each light is supplied with its own chained power supply which fits through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, as well as being able to keep the size of the light small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the light. There is a quick connector between the light and the power supply to facilitate installation. The light colour change is made by the switch on the power supply.
The light can be dimmed with a wireless dimmer or TRIAC dimmers, from the PRIMARY side, and they also work with home automation such as KNX. Suitable dimmers can also be ordered from us, "Led dimmers"
They work well for example:
- ABB (former Ensto) Jussi 6523U
- Schneider (ex strГ¶mfors) transistor controller 315W/VA(EXXACT)!
- VaLO Triac dimmer with remote control option
All our lights are CE and RoHS approved.
|Guarantee (year)||7 years|
|Colour rendering (CRI ±3)||98|
|Color temperature (K)||Adjustable CCT|
|Dimensions||Lenght 50mm, installation hole 75-80mm|
|Approved||CE, RoHS, IP54|
|Energy class||B (185lm/W)|
|Muuta||Dimmable, driver included, tilt 0-28 degrees, 3 Colour temperatures in one!|
Led SQUARE 023 15W is very low, only 50mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 78-80 mm in diameter.
All led spots come with driver that fits in from the installation hole. By having a separate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamp and the driver to make installation easy. Driver has chaining ability (2 inputs) and quick connectors
This light has adjustable white colour temperature with 3 steps: 2700-4000-5300K. Always turn power off before changing colour, otherwise you will damage light.