Be the first to review this product
LED downlight — SQUARE DOUBLE SQ233BR, IP44, CCT 2700-4000-5300K,dimmable 18W, BRUSHED, high CRI98
LED DOUBLE SQUARE SQ233BR CCT (brushed aluminum) 18W Light is dimmable, adjustable and moisture-proof (IP54). The color rendering index (CRI) of the Light is 98 (full spectrum). The Light has an adjustable light temperature of 2700-4000-5300K. The Light has a light output equivalent to 2x+50W halogen.
LED DOUBLE SQUARE 233 CCT (brushed aluminium) 18W is dimmable, directional and moisture-proof (IP54), also from behind. The LED circuits are high quality LED circuits with a colour rendering index (CRI) of 98 (full spectrum!) and the colours are reproduced as they should be. In the light, the light comes beautifully from a single point. The light is also available in white and black.
The LED DOUBLE SQUARE 233 Brushed is suitable for general lighting applications from private homes to public spaces. In terms of luminous intensity, the LED SQ233BR is equivalent to at least 2x50W halogen, 2x600 lumens. The light has an extra lens for light equalisation, which, when removed, provides 2x750 lumens.
The light has an adjustable light temperature of 2700-4000-5300K with a power supply switch, so you can choose the right colour for your interior. Even change according to the seasons! If you want to adjust the light wirelessly without a ladder, you need a VaLO driver and a wireless push button.
The light is IP44, which means it is splash-proof. The driver of the light is not splash-proof.
LED Flush Mount SQ233BR is a flush mount light in cast aluminium with the LED circuit mounted directly on the body. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature and the high quality LED circuit guarantees a long lifetime of 50,000h and we grant a 7 year warranty on our manufactured light!
The LED module of the light is removable and replaceable.
See here for installation examples and ideas.
The light has a fixed frame. The light is very low, only 50-55mm high! The light will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the light to prevent the insulation from sagging. The mounting hole is an ellipse, 2x80mm holes are drilled 1cm apart and any excess pieces are removed between the holes.
Each light is supplied with its own chained power supply which fits through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, and we can keep the size of the light small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the light. There is a quick connector between the light and the power supply for easy installation. The light colour change is made by a switch on the power supply with three options, WW 2700K, DW 4000K and CW 5300 K. The power must be off when adjusting the colour temperature of the light. By default, the lamp is set to DW.
The light can be dimmed with wireless dimmers or TRIAC dimmers, from the PRIMARY side and they also work with home automation such as KNX. Suitable dimmers can also be ordered from us, "Led dimmers"
They work well for example:
- ABB (former Ensto) Jussi 6523U
- Schneider (ex strГ¶mfors) transistor controller 315W/VA(EXXACT)!
- VaLO Triac dimmer with remote control option
All our lights are CE and RoHS approved.
|Guarantee (year)||7 years|
|Colour rendering (CRI ±3)||98|
|Color temperature (K)||Adjustable CCT|
|Dimensions||Height 50mm, cutout 2x80mm, 1cm apart|
|Approved||CE, RoHS, IP54|
|Energy class||B (185lm/W)|
|Muuta||Dimmable, driver included, tilt 0-28 degrees, 3 Colour temperatures in one!|
Led DOUBLE SQUARE 233 CCT (Brushed) 18W is very low, only 50-55mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation two adjoining holes 80mm in diameter (holes 1 cm apart from each other. Cut the excess plaster from between the holes).
All led spots come with driver that fits in from the installation hole. By having a separate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamp and the driver to make installation easy. Driver has chaining ability (2 inputs) and quick connectors
This light has adjustable white colour temperature with 3 steps: 2700-4000-5300K. Always turn power off before changing colour, otherwise you will damage the fixture.