LED downlight —SLIM SPOT, CCT 2300-3000K-4000-5200K-6500K, SUPER SLIM 12W, high CRI 92-95

LED SLIM SPOT is powerful downlight for those low recessed ceilings with limited amout of space inside. Fits to 34mm ceilings (13mm plasterboard + 22m wooden board).

Light is CCT tunable. We use high quality led circuits with beam angle of 20° that is perfect as it has a minimal side glare. Light can be tilted (depending on the space between the ceilin) for about 30°. The colour rendering index (CRI) is 93-95 (Full spectrum!), depending of the light colour temperature.  This means that the colours of your interiors will look as brilliant, as they are supposed to. Light is also IP44, so you can install it to wet premises. Light is made with heavy aluminum to keep it cool, so it will last for a long time.

CRI by light colour temperature:

• 2300K has CRI 95
• 3000K has CRI 93
• 4000K has CRI 92
• 5200K (5000K) has CRI 93
• 6500K has CRI 93

Light has adjustable temperature between 2300-3000K-4000-5200K-6500K with a swich when ordered with the basic driver (to be selected during installation). So you can always match correct light temperature for you decor with the DIP switch. With extra button and controller, you can adjust light temperature seamlessly with a remote or an App (like Philips HUE). Light is suitable to be used as a general lighting in homes and offices. LED SLIP SPOT 12W gives out 1200 lumens.

Installation examples:

• reqular households, ceilings that have been recessed for just a little
• rooms where you need good working light like utilityrooms
• rooms where you want to be able to adjust the colour temperature of the light like livingrooms
• rooms where you want to avoid side glare from the light

LED SLIM SPOT is a recessed light made with cast aluminium. Led circuits are attached to the body of the lamp which guarantees a great heat conductivity and safe working temperature (under 50°C). Low working temperature and high quality LED chip makes the led last long, so we give this light superb 5 years guarantee.

Installation

LED SLIM SPOT is with strong springs and can be mounted up to 3 cm thick material. This light requires 34mm in height. Installation hole is 90mm diameter.

All led spots come with (IP21) driver that fits in from the installation hole. The driver is not waterproof. By having a separate driver, we have reduced the temperature of the light, making it last longer. There is also a a DIP switch to change the light colour temperature.

Dimming

LED SLIM SPOT is dimmable IF the basic driver is changed to a different drive. For example when connected to a CCT driver.

CCT tuning seamlessly

If you want to adjust the light colour temperature to anything between 2300-6500K, you need separate 24V driver and either a wireless button or an App to use the ability. Then all lights are connected paraller to same driver+controller and colour temperature can be adjusted from wireless buttons or software (VaLO Wifi, Philips Hue, etc..)

We are more than happy to help you with selecting the right combination for your needs, so do not hesitate to contact us for more information!

All our lights are CE and RoHS certified.