Be the first to review this product
LED downlight — ROUND, IP44, CCT 2700-4000-5300K adjustable & dimmable 15W, WHITE, high CRI98
LED ROUND 033 (white) 15W is dimmable and suitable to be used in wet premises (IP44). The colour rendering index (CRI) is 98 (Full spectrum!) Light has adjustable temperature between 2700-4000-5300K, so you can change it your self from indivitual light.
LED ROUND 033 (White) is dimmable and suitable to be used in wet premises (IP44). We use Citizen's high quality led circuits with beam angle of 45° that is perfect for general lighting. The colour rendering index (CRI) is 98 (Full spectrum!) which means that the colours of your interior will look brilliant, as they are supposed to.
Light has adjustable temperature between 2700-4000-5300K, so you can change it your self from indivitual light. So you can always match correct light temperature for you decor from DIP switch. With extra controller and driver, you can adjust light temperature seamlessly with remote. Light is suitable to be used as a general lighting in homes and offices. Led ROUND 033 is more than equivalent to a 75W halogen and gives out 1000 lumens Light has extra light softening lens and by removing it you can increase light output to 1250Lumen
This light is also available in 9W version.
LED ROUND 033 is a recessed light made with cast aluminium. Led circuits are attached to the body of the lamp which guarantees a great heat conductivity and safe working temperature (under 50°C). Low working temperature and high quality LED chip makes the led last long, so we give this light superb 7 years guarantee. The light is also available in silver and black.
Installation
LED ROUND 033 has tiltable frame, 0-28 degrees. This light is very low, only 50-60mm in height (height increases when tilted). Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 76-80mm in diameter.
All led spots come with (IP22) driver that fits in from the installation hole. The driver doesn´t tolerate water. Cannot be installed directly on top of shover. By having a separate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamp and the driver to make installation easy.
Dimming
LED ROUND 023 is dimmable with primary side dimmers (normal, rotatable wall dimmers). Works well with house automation systems like KNX. Our dimmer section has few dimmers to be used with this spot. This Led light dims 0-100% with VaLO series dimmer.
All our lights are CE and RoHS certified.
Guarantee (year) | 7 years |
---|---|
Colour rendering (CRI ±3) | 98 |
Model | Led-033W-CCT-15W |
Lumen | 1,250.00 |
Color | White |
Color temperature (K) | 2700, 4000, 5300 |
Light Adjustment | CCT |
Adjustability | Adjustable |
Watt | 15.00 |
Lifespan | 50000 |
Dimensions | Lenght 50-60mm, installation hole 76-80mm |
Installation hole | 76.00 |
Product diameter | 9 |
Product height | 9 |
Product width | 9 |
Product depth | 5 |
Approved | CE, RoHS, IP44 |
Energy class | A++ |
Muuta | Dimmable, driver included, 3 Colour temperatures in one! |
IP Class | IP44 |
Chainable | Yes |
Mounting Method | Recessed |
Color temperature (Kelvin) | 4000 |


Led ROUND 033 is adjustable and can be tilted 0-28 degrees. This light is very low, only 50-60mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 76-80mm in diameter.
All led spots come with driver that fits in from the installation hole. By having a seperate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamp and the driver to make installation easy.
This light has adjustable white colour temperature with 3 steps: 2700-4000-5300K. Always turn power off before changing colour, otherwise you will damage light.