Be the first to review this product
LED downlight — ROUND 033, IP44, CCT 2900-4000-5300K adjustable & dimmable 9W, WHITE, high CRI98
LED ROUND 033 (WHITE) 9W light fixture is dimmable and moisture-proof (IP44). The color rendering index (CRI) of the fixture is 98 (full spectrum). The fixture has an adjustable color temperature of 2900-4000-5300K. The light output of the fixture is equivalent to a +50W halogen bulb.
LED LIGHT ROUND 033 CCT (white) is dimmable, directional and moisture-proof (IP44). We use high quality LED light sources with a colour rendering index (CRI) of 98 (full spectrum!) and the colours are reproduced as they should be. The light in the light comes beautifully from a single point. The light is also available in silver and black.
LED LIGHT ROUND 033 CCT is suitable for general lighting applications from private homes to public spaces. The LED ROUND 033 has a luminous intensity equivalent to at least 50W halogen, +600 Lumen. The light is equipped with an auxiliary lens which, when removed, increases the light output to 750 Lumen. Thanks to its directionality, the light can also be used on sloping ceilings.
A 15W version is also available for offices and high spaces.
The light has an adjustable light temperature of 2900-4000-5300K with a power supply switch, so you can choose the right colour for your interior. Even change according to the seasons!
If you want to adjust the colour temperature of the light at any time without a ladder, you will need a CCT controller (e.g. for a max 100W group):
- VaLO RF: VaLO RF 100W driver and VaLO RF CCT wireless push-button.
- VaLO Zigbee: VaLO Zigbee 100W driver and VaLO Zigbee CCT wireless button.
- Wireless control: 100W 24V driver and embeddable pushbutton in the box.
Please note that for group control, the Valasim's own driver will be omitted and replaced by a larger group driver. As the power requirement decreases, the driver will be increased by 25%, i.e. 6x9W CCT spots will need a minimum of 68W driver. The driver can always be much larger.
The light is IP44, i.e. the light is splashproof. If you want to be sure that the light will last the promised 50 000 hours, then due to its directionality we do not recommend for bathroom ceilings connected to saunas, where water vapour can enter the mounting space between the light frame. The driver of the light is not moisture-proof, but will withstand outdoor use in eaves in dry conditions.
LED LIGHT ROUND 033 CCT is a recessed light in cast aluminium with the LED circuit mounted directly on the frame. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature and the high quality LED circuit guarantees a long lifetime, 50,000h and we grant a 7 year warranty on our manufactured light!
The LED module of the light is removable and replaceable.
Click here for installation examples and photos
The light is directional, 0-28 degrees. The light is very low, only 50-60mm high! The light will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the light to prevent the insulation from sagging. The mounting hole diameter is 76-80mm.
Each light is supplied with its own chained power supply which fits through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, and we can keep the size of the light small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the light. There is a quick connector between the light and the power supply for easy installation.
The light colour change is made by a switch on the power supply. The options are WW 2700K, DW 4000K and CW 5300 K. The power must be switched off before changing the colour, otherwise the light will be damaged. By default, the power supply of the light is set to DW (4000K).
The light can be dimmed with a wireless dimmer or TRIAC dimmers, from the PRIMARY side and they also work with home automation such as KNX. Suitable dimmers can also be ordered from us, "Led dimmers".
They work well for example:
- ABB (former Ensto) Jussi 6523U
- Schneider (ex strГ¶mfors) transistor controller 315W/VA(EXXACT)!
- VaLO Triac dimmer with remote control option
All our lights are CE and RoHS approved.
|Guarantee (year)||7 years|
|Colour rendering (CRI ±3)||98|
|Color temperature (K)||Adjustable CCT|
|Dimensions||Lenght 50-62mm, installation hole 76-80mm|
|Approved||CE, RoHS, IP44|
|Energy class||B (185lm/W)|
|Muuta||Dimmable, driver included, tilt 0-28 degrees, 3 Colour temperatures in one!|
Led ROUND 033 CCT (white) is adjustable and can be tilted 0-28 degrees. This light is very low, only 50-62mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 76-80mm in diameter.
All led spots come with driver that fits in from the installation hole. By having a seperate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamp and the driver to make installation easy.
This light has adjustable white colour temperature in 3 steps: 2700-4000-5300K. Always turn power off before changing colour, otherwise you will damage light.