LED downlight — ROUND 023, IP54, CCT 2900-4000-5500K,dimmable 9W, BLACK, high CRI98

In stock 100
SKU
023B-CCT-9W

LED ROUND 023 (black) 9W Light is dimmable and moisture-proof (IP54). The color rendering index (CRI) of the Light is 98 (full spectrum). The Light has a switch-selectable light color temperature of 2900-4000-5300K or alternatively, the basic transformer can be removed and a group transformer can be obtained to adjust the color tone of the light continuously.

€79.00
LED downlight — ROUND 023, IP54, CCT 2900-4000-5500K,dimmable 9W, BLACK, high CRI98 is available to buy in increments of 1

LED LIGHT ROUND 023 (black) is dimmable and moisture-proof (IP54), also from behind. As LED circuit we use high quality Citizen LED circuits with a colour rendering index (CRI) of 98 (full spectrum!) and the colours are reproduced as they should be. In the light, the light comes beautifully from a single point. The lamp is also available in silver and white.

LED ROUND 023 is suitable for general lighting applications from private homes to public spaces. The LED ROUND 023 has a luminous intensity of at least 50W halogen, +700 Lumen. The light is equipped with a light-balancing glass lens.

A 15W version is also available for offices and high spaces.

The light has an adjustable light temperature of 2900-4000-5300K with a switch, so you can choose the right colour for your interior. Even change according to the seasons!

If you want to adjust the colour temperature of the light at any time without a ladder, you will need CCT controllers (e.g. for a max 100W group):

  • VaLO RF: VaLO RF 100W driver and VaLO RF CCT wireless push-button.
  • VaLO Zigbee: VaLO Zigbee 100W driver and VaLO Zigbee CCT wireless button.
  • Wireless control: 100W 24V driver and embeddable pushbutton in the box.

Please note that for group control, the Valasim's own driver will be omitted and replaced by a larger group driver. As the power requirement decreases, the driver will be increased by 25%, i.e. 6x9W CCT spots will need a minimum of 68W driver. The driver can always be much larger.

The light is IP54, i.e. the light is splashproof. The driver of the light is not splash-proof, but can withstand outdoor eaves.

ROUND 023 is a flush mounted light in cast aluminium with the LED circuitry mounted directly on the body. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature and the high quality LED circuit guarantees a long lifetime of 50,000h and we grant a 7 year warranty on our manufactured light!

The LED module of the light is removable and replaceable.

Led Spotit

See here for installation examples and ideas.

Installation

The light has a fixed frame. The light is very low, only 50mm high! The light will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the light to prevent the insulation from sagging. The diameter of the mounting hole is 65-70mm.

Each light is supplied with its own chained power supply which fits through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, and we can keep the size of the light small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the light. There is a quick connector between the light and the power supply to facilitate installation. The light colour change is made by the switch on the power supply.

It is possible to install the light with infinitely variable colour temperature control. In this case, tick the box "without driver" to order the light and then purchase a CCT driver suitable for your system, sized according to the group size you require. We have DALI (DT8), Zigbee (e.g. Philips HUE/Samsung Smart Things compatible) or RF drivers available.

Dimming

The light can be dimmed with wireless dimmers or TRIAC dimmers, from the PRIMARY side and they also work with home automation such as KNX. Suitable dimmers can also be ordered from us, "Led dimmers".

They work well for example:

  • ABB (former Ensto) Jussi 6523U
  • Schneider (ex strГ¶mfors) transistor controller 315W/VA(EXXACT)!
  • VaLO Triac dimmer with remote control option

All our lights are CE and RoHS approved.

More Information
Guarantee (year) 7 years
Colour rendering (CRI ±3) 98
Model Led-023B-CCT-9W
Lumen 600.00
Color Black
Color temperature (K) Adjustable CCT
Light Adjustment CCT
Adjustability Not adjustable
Watt 9.00
Lifespan 50000
Dimensions Lenght 50mm, installation hole 66mm
Installation hole 66.00
Product diameter 7.8
Product height 7.8
Product width 7.8
Product depth 5
Approved CE, RoHS, IP54
Energy class B (185lm/W)
Muuta Dimmable, driver included, tilt 0-28 degrees, 3 Colour temperatures in one!
IP Class IP54
Chainable Yes
Mounting Method Recessed
Customer Reviews
Customer Questions
No Questions
Did you find what you were looking for?

Led ROUND 023 is very low, only 50mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 65-70mm in diameter.

All led spots come with driver that fits in from the installation hole. By having a seperate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamp and the driver to make installation easy. Dirver has chaining ability (2 inputs) and quick connectors

This light has adjustable white colour temperature with 3 steps: 3000-4000-5500K. Always turn power off before changing colour, otherwise you will damage light.

Ratings & Reviews

Be the first to review this product

We found other products you might like!
© Lamppukauppa Led Store Oy. 2022 All Rights Reserved