LED downlight — LINJA 2, IP44, dimmable 2x2W, matte white/black, high CRI93, 3000K

In stock 8
Only 8 left
SKU
LINJA2-3000

LED LINJA 2 (matte white, black interior) Light is dimmable and moisture-proof (IP44). The Light has a light output equivalent to 2x20W halogen. The color rendering index (CRI) of the Light is top class, at 93! Linja 2 is perfect for narrow beam lighting indoors, such as highlighting wall surfaces and paintings, in corridors, and for those in need of narrow beam general lighting. Outdoor lighting targets include terrace roofs and eaves.

€49.00
LED downlight — LINJA 2, IP44, dimmable 2x2W, matte white/black, high CRI93, 3000K is available to buy in increments of 1

Superior technology

LED LINJA 2 (matt white, black interior) is dimmable and moisture-proof (IP44). With a colour rendering index (CRI) of more than 93, the colours in your interior will look natural. The luminous intensity is equivalent to 2x20W halogen, with a consumption of only 2x2W! The light is available in both 3000K (warm white) and 4000K (neutral white).

The LED LINJA 2 has a very narrow opening angle of only 15 degrees and is therefore typically used in high spaces and to create decorative light, in front of wardrobes or in corridors. Linja 2 is perfect for narrow-angle lighting indoors, for example as accent lighting for wall surfaces and paintings, in corridors and for those who need narrow-angle general lighting. Outside, it can be used for outdoor lighting such as patio ceilings and eaves.

The white edge of the frame is 7mm wide and the light sources are 10mm deep in square black light holes.

LED LINJA 2 is a recessed light in cast aluminium, with the LED circuitry mounted directly on the frame. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature guarantees a long lifetime, 50,000 and we grant a 5 year warranty on our manufactured light! The light is also available in 5x2W and 10x2W models.

Linja Spotit

See here for installation examples and ideas

Led light installation

The light is very low, only 50mm high! The light will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a board or piece of plasterboard above the light to prevent the insulation from sagging. The mounting hole is 34x64mm.

Each light is supplied with its own power supply to fit through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, and we are able to keep the size of the light small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the light. There is a quick connector between the light and the power supply to facilitate installation.

Dimming

The light can be dimmed with a wireless dimmer or TRIAC dimmers, from the PRIMARY side, and they also work with home automation systems such as KNX, Talomatti, etc. You can also order suitable dimmers from us, "Led dimmers"

They work very well for example:

  • ABB (former Ensto) Jussi 6523U
  • Schneider (ex strГ¶mfors) transistor controller 315W/VA EXXACT

All our lamps are CE and RoHS approved.

More Information
Guarantee (year) 5 years
Colour rendering (CRI ±3) 93
Model LINJA 2
Lumen 400.00
Color Mattwhite
Color temperature (K) 3000
Adjustability Not adjustable
Watt 4.00
Lifespan 50000
Dimensions Height 50mm, cutout 34x64mm
Installation hole 64.00
Product height 4.4
Product width 7.4
Product depth 5
Approved CE, RoHS, IP44
Energy class B (185lm/W)
Muuta Dimmable, driver included
IP Class IP44
Mounting Method Recessed
Customer Reviews
Customer Questions
No Questions
Did you find what you were looking for?

LED LINJA 2. This light is very low, only 50mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 34x64mm in diameter (holes next to each other, cut the excess plaster from between the holes).

All led spots come with driver that fits in from the installation hole. By having a seperate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamps and the driver as well as two inputs to make installation easy.

Ratings & Reviews

Be the first to review this product

© Lamppukauppa Led Store Oy. 2022 All Rights Reserved