Be the first to review this product
LED downlight — LINJA 10, IP44, dimmable 10x2W, matte white/black, high CRI93, 3000K
LED LINJA 10 (matte white, black interior) Light is dimmable and moisture-proof (IP44). The Light has a light output equivalent to 10x20W halogen. The color rendering index (CRI) of the Light is top class, at 93! Linja 10 is perfect for narrow beam lighting indoors, such as highlighting wall surfaces and paintings, in corridors, and for those in need of narrow beam general lighting. Outdoor lighting targets include terrace ceilings and eaves.
Superior technology
LED LINJA 10 (matt white frame, black interior) is the dimmable and moisture-proof (IP44) king of line lights, inspired by the iGuzzini Laser model. With a colour rendering index (CRI) of more than 92, the colours in your interior will look natural. The luminous intensity is equivalent to 10x20W halogen, with a consumption of only 10x2W! The light is available in both 3000K (warm white) and 4000K (neutral white).
The LED LINJA 10 has a very narrow opening angle of only 15 degrees, so it is typically used in high spaces and to create decorative light, e.g. in front of wardrobes or in corridors. Line 10 is perfect for narrow-angle lighting indoors, for example as accent lighting for wall surfaces and paintings, in corridors and for those looking for narrow-angle general lighting. Outdoors, it can be used for a terrace roof and eaves, for example.
The white edge of the frame is 7mm wide and the light sources are 10mm deep in square black light holes.
LED LINJA 10 is a recessed light in cast aluminium, with the LED circuit mounted directly on the frame. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature ensures a long life of 50,000 hours and we grant a 5-year warranty on the light we manufacture! The light is also available in LINJA 5x2W and LINJA 2x2W models.
See here for installation examples and ideas
Led light installation
The light is very low, only 50mm high! The light will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a board or piece of plasterboard above the light to prevent the insulation from sagging. The mounting hole is 34x265mm. The ends of the light have mounting springs.
Each light is supplied with its own power supply, which fits through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, and we are able to keep the size of the light small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the light. There is a quick connector between the light and the power supply for easy installation and replacement.
Dimming
The light can be dimmed with wireless dimmers or TRIAC dimmers, PRIMARY side and they also work with home automation systems such as KNX, Talomatti, etc. You can also order suitable dimmers from us, "Led dimmers"
They work very well for example:
- ABB (former Ensto) Jussi 6523U
- Schneider (ex strömfors) transistor controller 315W/VA EXXACT
All our lamps are CE and RoHS approved.
Guarantee (year) | 5 years |
---|---|
Colour rendering (CRI ±3) | 93 |
Model | LINJA 10 |
Lumen | 2,000.00 |
Color | Mattwhite |
Color temperature (K) | 3000 |
Adjustability | Not adjustable |
Watt | 20.00 |
Lifespan | 50000 |
Dimensions | Height 50mm, cutout hole 34x265mm |
Installation hole | 265.00 |
Product diameter | 28 |
Product height | 28 |
Product width | 4.4 |
Product depth | 5 |
Approved | CE, RoHS, IP44 |
Energy class | B (185lm/W) |
Muuta | DImmable Similiar to Lazer |
IP Class | IP44 |
Mounting Method | Recessed |
LED LINJA 10 light is very low, only 50mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 34x265mm.
All led spots come with driver that fits in from the installation hole. By having a separate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamps and the driver and skrew inputs to make installation easy.