Be the first to review this product
LED downlight — FIXED SQUARE DOUBLE, IP54, CCT 2700-4000-5300K,dimmable 18W, BLACK, high CRI98
LED FIXED DOUBLE SQUARE 223 (black) 18W Light is dimmable and moisture-proof (IP54). The color rendering index (CRI) of the Light is 98 (full spectrum). The Light has an adjustable light temperature of 2700-4000-5300K. The Light has a light output equivalent to 2x+50W halogen. The light comes beautifully from the recess.
LED FLEXIBLE PLATE 223 (black) 18W light is dimmable and moisture-proof (IP54), also from behind. This is a more efficient version of our recommended light for demanding applications due to the double light source. We use high quality LED circuits with a colour rendering index (CRI) of 98 (full spectrum!) and the colours are reproduced as they should be. The light has a beautiful single point of light and is a "hotel style" recessed light that does not glare... The light is also available in brushed silver and white.
The LED KINTEГ„ FLOOR LAMP 223 is suitable for general lighting applications from private homes to public spaces. In terms of luminous intensity, the KINITE LED TUPLAKANT 223 is equivalent to at least 2x50W halogen, 2x600 Lumen. The light has an extra lens for light equalisation, which, when removed, provides 2x750 Lumen.
The light has an adjustable light temperature of 2700-4000-5300K with a switch, so you can choose the right colour for your interior. Even change according to the seasons! If you want to adjust the light wirelessly without a ladder, you need a VaLO driver and a wireless button.
The light is IP44 protected against splashing water, even from the back. The driver of the light is not splash-proof, but can withstand outdoor eaves.
LED Flush Mount 223 is a flush mount light in cast aluminium with the LED circuitry mounted directly on the body. The solution achieves maximum thermal conductivity and safe operating temperature (below 50 degrees Celsius). The low operating temperature and the high quality LED circuit guarantees a long lifetime of 50,000h and we grant a 7 year warranty on our manufactured light!
The LED module of the light is removable and replaceable.
Click here for installation examples and photos
The light has a solid body. The light is very low, only 50mm high! The light will therefore fit into a typical roof structure with only 48x48mm of insulation and 13mm plasterboard under the vapour barrier. We recommend installing a piece of board or plasterboard above the light to prevent the insulation from sagging. The mounting hole is an ellipse, 2x76mm holes are drilled 1cm apart and any excess pieces are removed between the holes.
Each light is supplied with its own chained power supply which fits through the mounting hole into the mounting space. By moving the power supply away from the light, we prevent the power supply from heating up the light, and we can keep the size of the light small. The power supplies are long-lived and this also allows us to avoid the typical problem with halogen lamps, where one power supply is subjected to a heavy load and gets hot, and breaks the light. There is a quick connector between the light and the power supply to facilitate installation. The light colour is changed by the switch on the power supply, but only when the light is off.
The light can be dimmed with a wireless dimmer or TRIAC dimmers, from the PRIMARY side, and they also work with home automation such as KNX or free@home. You can also order suitable dimmers from us, "Led dimmers".
They work very well for example:
- ABB (former Ensto) Jussi 6523U
- Schneider (ex strГ¶mfors) transistor controller 315W/VA(EXXACT)!
- VaLO Triac dimmer with remote control option
All our lights are CE and RoHS approved.
|Guarantee (year)||7 years|
|Colour rendering (CRI ±3)||98|
|Color temperature (K)||Adjustable CCT|
|Dimensions||Height 50mm, cutout 2x76mm, 1cm apart|
|Approved||CE, RoHS, IP54|
|Energy class||B (185lm/W)|
|Muuta||Dimmable, driver included, 3 Colour temperatures in one!|
LED DOUBLE SQUARE 223 has two fixed led lights. This light is very low, only 50mm in height. Fits to typical ceiling structure where there is 48x48 ceiling frame and 13mm plaster board. We recommend you to install a piece of plaster board on top of the light to stop the insulation from pressing on to the light. Installation hole is 2x76mm in diameter (holes 1 cm apart from each other. Cut the excess plaster from between the holes).
All led spots come with (IP22) driver that fits in from the installation hole. Driver has chaining ability (2 inputs). The driver doesn´t tolerate water. By having a separate driver, we have reduced the temperature of the light, making it last longer. There is a quick connector on the cord between the lamp and the driver to make installation easy. Do not change light colour DIP switch when light is ON!