VaLO 24V DRIVER 75W with built-in RF receiver

VaLO RF dimmable power supply

VaLO series RF dimmable four-channel power supply for 24V led strip lighting. Suitable for monochrome strips as well as W+RGB, RGB and CCT strips. RF receiver built-in, so for wireless dimming you only need a button to be paired with a driver. Max. load per channel 18,75W when using all four channels. When using only one channel 75W or two channels, the max. load is 37,5W per channel. The power supply must be installed in a dry place. The wiring must be carried out by a person authorised to do so.

Dimming of the power supply and colour adjustment of the strip shall be made by means of the buttons of the VaLO series. So order the correct dimmer button depending on the type of tape you are using e.g. (note: other options also available):

• W+RGB or RGB VaLO button
• CCT button
• Dimming button for monochrome strip

Dimensions

Length: 244mm
Width: 64mm
Height: 32mm

FITTING NOTE: When using RGB and W+RGB strip, please note the correct RGB wire order. R (red) and G (green) wires on the strip are in a different order than on the driver. That is, install the R, wire in position 1 and the G wire in position 2.

Please contact us if you need ready-made LED strip assemblies with drivers ready for installation. We serve custom-made orders at LedStore's LedShop.