LED STRIP SOLO SLIM 7,2W/m (36W/5m) 24V, 4000K, IP65

The Superhead 4000K SOLO SLIM 7.2W/m strip light is beautifully even. The colour rendering index of the strip is 94-95 which means that the colours are beautifully reproduced. This LED strip is dimmable. The SOLO SLIM strip is, as its name suggests, only 5mm narrow!

If you want a custom made LED strip or a custom made profile with your own dimensions try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/mittatilaus

Product information

The SOLO SLIM 7,2W/m light strip is very uniform and efficient (795 lumens per meter) and has 608 LED circuits per meter. This makes the light uniform.

Installation

The LED strip comes in 5m rolls and can be cut to size up to 25mm apart. The strip comes with a 50 cm DC plug-in connecting cable pre-wired at both ends. The red wire is the +, and the black wire is the -. Our LED strip is easy to attach with the 3M very strong adhesive tape included. The cut points can be found on the underside of the strip under the tape. The cut points have copper dots, so you can solder a low current wire to the strip from these points to connect to the driver. We recommend soldering the tapes together. When soldering, use a knife to open the silicone coating that protects the strip at the copper points.

We recommend that for long runs (over 10m), the driver supply is branched at both ends of the LED strip to avoid light degradation at one end of the strip. The led strip should always be attached to an aluminium strip so that excess heat is conducted away from the led circuit. This will prolong the life of the led strip. Aluminium profiles can be ordered from our online shop, where we have a wide range of different profiles available. We also offer a range of branching plugs and connecting wires.

LED strip works well with solar power, boats and cars if they use 24VDC. Then a separate power supply is not needed. In other cases, order a 24V power supply of suitable power for the strip. The power supply does not need to be dimmable when dimming with a regulator and receiver. Alternatively, a wireless control RF or Zigbee driver is available, where the driver is paired directly with the wireless button.

We are happy to help with installation and ordering questions.

Dim

To dim your LED strip, you can use either a traditional rotary, wired dimmer or our VaLO RF Series wireless dimmer. When using the rotary conventional dimmer, the driver of the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is powered by a constant current.

In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use SOLO SLIM LED strip only for traditional applications when you can make a light out of almost anything? The strip's special headband builds offer new possibilities! Create your own wall light by bending the LED strip and the aluminium profile to the shape you want, or by fixing the LED strip to another highly heat conductive material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make LED strip made to measure at LedStore's LedShop.