Be the first to review this product
LED STRIP SMD 5050, 7,2W/m (36W/5m) 12V, water resistant IP65, high CRI90, 3000K
Helmeile 7,2W/m - led strip light 12V ideal for lighting railings and plinths (5m roll). This led strip has a CRI of +90 and is dimmable and moisture-proof to IP65 (anti-fading surface).
If you want a special size led strip or a custom-made profile with your own dimensions, try our custom-made calculator!
Use the calculator to calculate the price for different needs with wireless control or ON/OFF operation. For one or more levels!
https://ledstore.fi/mittatilaus
LED strip 12V HELMEILE
In the Helmeile LED strip we use SMD 5050 LED circuit with a colour rendering index of over 90. This LED strip is dimmable and moisture-proof to IP65 (anti-fading surface). Our LED strip is easy to fix with the 3M high adhesive tape. The 7,2W/m of the Helmeile led strip is equivalent to 15W fluorescent tube, so you will save a lot of electricity with this solution! The tape comes in a 5m roll.
If you want a custom made led strip or a custom made profile with your own dimensions, try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/mittatilaus
For accent lighting
Our Helmeile strip has a luminous intensity of 7.2W/m and 500 lumens/m. The strip has 30 LED circuits per meter. This makes the light uniform enough for lighting stairs, railings and plinths, for example. When mounted on an aluminium profile, the spotlight is only visible when viewed directly from the front. When indirectly illuminated through a wall, the light is uniform. The CRI of the strip is over 90, which is excellent and suitable for use in home lighting.
Installation
In addition to the strip, the installation of the Led strip requires a driver, an aluminium profile and operating switches.
The LED strip 12V comes in a 5m roll and can be cut to size up to 10cm apart. The tape has clear markings to make cutting easier. We recommend soldering the strips together, as we have found that the quick-release fasteners loosen over time and loosening causes the lights to flash. There are pre-soldered connectors at both ends of the tape, which can be used depending on the destination. We will be happy to help with any installation questions.
We recommend powering from both ends if the strip is more than 5m in a continuous length. This prevents light loss and provides an equally bright light from both ends. The LED strip should always be attached to an aluminium (or other metal) strip to allow excess heat to be conducted away from the LED circuitry. This will prolong the life of the led strip, and keep the warranty valid. Aluminium profiles can be ordered from our online shop, where they are available in a variety of different types.
LED strip 12v works well with solar power, boats and cars that use 12VDC, then a separate power supply is not needed. In other cases, order a 12V power supply suitable for the strip (e.g. 5m 36W is 72W in total, so any 12V power supply above 36W will do).
The installation of unplugged drivers is electrical work and requires adequate qualifications. We are happy to help with any questions regarding installation.
Dim
For dimming your LED strip you can use either a traditional rotary wired dimmer or our VaLO RF series wireless dimmer. When using a conventional rotary dimmer, the driver of the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is powered by a constant current.
In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.
With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.
Create your own light
Why use an LED strip only for traditional applications when you can make a light from almost anything? Create your own wall light by bending the LED strip and the aluminium profile into the shape you want, or by fixing the LED strip to another heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make LED strip made to measure at LedStore's LedShop.
Light colour temperature
Halogen equivalent 3000K, warm white and slightly more modern neutral white 4000K.
Guarantee (year) | 3 years |
---|---|
Colour rendering (CRI ±3) | 90 |
Model | STRIP72 |
Lumen | 2,500.00 |
Voltage (V) | 12 |
Color temperature (K) | 3000 |
Watt | 7.00 |
Lifespan | 35000 |
Dimensions | 10x5mm, 5m roll |
Approved | CE, RoHS, IP65 |
Energy class | B (185lm/W) |
Muuta | 3M tape on backside |
IP Class | IP65 |
Strip sould ALWAYS be installed on aluminium profile for the led strip to cool down properly. Incorrect installation will void warranty.