LED STRIP SMD 2835, 14.4W/m (72W/5m) 24V, water resistant IP65, high CRI90, 5500K

LED strip light - HELMEILE 14,4 W/m

Our Helmeile strip has a luminous intensity of 14.4W/m and 120 LED circuits per metre. The roll contains five metres of LED strip 120 LED circuits per metre make the light uniform enough for indirect lighting and worktop lighting, for example. When mounted on a shallow (7mm) aluminium profile, the pointiness is only slightly noticeable. When indirectly illuminated through a wall, the light is uniform. The CRI of the strip is over 95, which is excellent and suitable for use in home lighting. This LED strip light 24V version is more resistant to long feeds without light loss than its sister product 12V 14,4 W/m.

If you want a special size led strip or a custom made profile with your own dimensions try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/mittatilaus

About

In the Helmeile strip light we use SMD 2835 LED chips with a colour rendering index of over 95. This LED strip is dimmable and waterproof (non-yellowing, thin silicone surface). Our LED strip is easy to attach with the 3M adhesive tape included.This LED strip 14,4W/m is equivalent in light output to almost 120cm of fluorescent tube, so you will save a lot of electricity with this solution!

The LED strip is available in three light colours. The halogen equivalent 3000K and the slightly more modern neutral white 4000K and cool white 5500K.

If you want an LED strip where the colour temperature of the light can be changed infinitely variable from the same strip, then the 14,4 W/m CCT LED strip is your choice.

Installation

In addition to the led strip, you will also need a power supply and an aluminium profile, as well as operating switches.

The LED strip comes in 5m rolls and can be cut to size every 5cm. The tape has clear markings to make cutting easier. We recommend soldering the strips together, as we have found that the quick connectors loosen over time and loosening causes the lights to flash. Both ends of the tape have pre-soldered connectors with DC plugs that can be used depending on the destination.

We recommend powering from both ends if the strip is more than 10 metres in a continuous length. This prevents light loss and provides an equally bright light from both ends. The LED strip should always be attached to an aluminium strip to allow excess heat to be conducted away from the LED circuitry. This will extend the life of the LED strip and keep the warranty valid. Aluminium profiles can be ordered from our online shop, where they are available in several different types.

LED strip 24V works well with solar power and boats that use 24VDC, then a separate power supply is not needed. In other cases, order a suitable 24V power supply for the strip (e.g. 5m 14,4W is 72W in total, so any 24V power supply above 80W will work).

Connecting plugless drivers is electrical work and requires adequate qualifications. We are happy to help with any installation questions.

Dim

We recommend the use of a wireless dimmer for dimming the LED strip. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is powered by a constant current. With this system, you simply install a receiver between the LED strip and the power supply and control the strip with a wireless switch wherever you want. The wireless switch is powered by batteries, which are replaceable. You can also mount the wireless switch on the wall if you wish, but you don't need a separate power supply.

If you want to dim the strip with a wall-mounted, rotary control, choose a TRIAC power supply to go with the strip. Tested dimmers and test results can be found here.

Create your own lamp

Why use an LED strip only for traditional applications when you can make a light out of almost anything? Create your own wall light by bending the LED strip and the aluminium profile to the shape you want, or by fixing the LED strip to another material that conducts heat well. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make LED strip made to measure at LedStore's LedShop.