Be the first to review this product
LED STRIP SMD 2835, 14.4W/m (72W/5m) 24V, water resistant IP65, high CRI90, 3000K
Helmeile 14.4W/m LED strip (24V) is an excellent choice for illuminating kitchen countertops and indirect lighting. The LED strip is dimmable and moisture-proof (IP65). The light output is 1000 lumens per meter. Comes in a 5m roll.
If you need a custom-sized LED strip or a profile with your own measurements, try our custom order calculator!
With the calculator, you can calculate the price for different needs, including wireless control or ON/OFF use. For one or multiple levels!
https://ledstore.fi/mittatilaus
LED strip light - HELMEILE 14,4 W/m
Our Helmeile strip has a luminous intensity of 14.4W/m and 120 LED circuits per metre. The roll contains five metres of LED strip 120 LED circuits per metre make the light uniform enough for indirect lighting and worktop lighting, for example. When mounted on a shallow (7mm) aluminium profile, the pointiness is only slightly noticeable. When indirectly illuminated through a wall, the light is uniform. The CRI of the strip is over 95, which is excellent and suitable for use in home lighting. This LED strip light 24V version is more resistant to long feeds without light loss than its sister product 12V 14,4 W/m.
If you want a special size led strip or a custom made profile with your own dimensions try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/mittatilaus
About
In the Helmeile strip light we use SMD 2835 LED chips with a colour rendering index of over 95. This LED strip is dimmable and waterproof (non-yellowing, thin silicone surface). Our LED strip is easy to attach with the 3M adhesive tape included.This LED strip 14,4W/m is equivalent in light output to almost 120cm of fluorescent tube, so you will save a lot of electricity with this solution!
The LED strip is available in three light colours. The halogen equivalent 3000K and the slightly more modern neutral white 4000K and cool white 5500K.
If you want an LED strip where the colour temperature of the light can be changed infinitely from the same strip, then the 14.4 W/m CCT LED strip is your choice.
Installation
In addition to the led strip, you will also need a power supply and an aluminium profile, as well as operating switches.
The LED strip comes in 5m rolls and can be cut to size every 5cm. The tape has clear markings to make cutting easier. We recommend soldering the strips together, as we have found that the quick connectors loosen over time and loosening causes the lights to flash. Both ends of the tape have pre-soldered connectors with DC plugs that can be used depending on the destination.
We recommend powering from both ends if the strip is more than 10 metres in a continuous length. This prevents light loss and provides an equally bright light from both ends. The LED strip should always be attached to an aluminium strip to allow excess heat to be conducted away from the LED circuitry. This extends the life of the LED strip and keeps the warranty valid. Aluminium profiles can be ordered from our online shop, where they are available in several different types.
LED strip 24V works well with solar power and boats that use 24VDC, then a separate power supply is not needed. In other cases, order a suitable 24V power supply for the strip (e.g. 5m 14,4W is 72W in total, so any 24V power supply over 80W will work).
Connecting plugless drivers is electrical work and requires adequate qualifications. We are happy to help with any installation questions.
Dim
To dim your LED strip, you can use either a traditional rotary wired dimmer or our VaLO RF series wireless dimmer. When using a conventional rotary dimmer, the driver of the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is powered by a constant current.
In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.
With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.
Tested dimmers and test results can be found here.
Create your own lamp
Why use LED strip lighting only for traditional applications when you can make a light out of almost anything? Create your own wall light by bending the LED strip and the aluminium profile into the shape you want, or by fixing the LED strip to another heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make custom-made LED strip lighting at LedStore's LedShop.
Guarantee (year) | 3 years |
---|---|
Colour rendering (CRI ±3) | 90 |
Model | STRIP144 - 24V IP65 |
Lumen | 5,000.00 |
Voltage (V) | 24 |
Color temperature (K) | 3000 |
Watt | 14.00 |
Lifespan | 35000 |
Dimensions | 11x2x5000mm (roll) |
Product height | 500 |
Product width | 1.1 |
Product depth | 0.2 |
Approved | CE, RoHS, IP65 |
Energy class | B (185lm/W) |
Muuta | 3M tape on backside |
IP Class | IP65 |
Strip should ALWAYS be installed on aluminium profile for the led strip to cool down properly. Incorrect installation will void warranty.