Search for: led areas led strip pir swich 12 24v
Related search terms
24V DALI DT8 LED DRIVER 200W, dimmable, IP20, for CCT or RGB+W LED lights €209.00 led lights led strip drivers 12 driver 120 2 led lights led strip drivers 12 driver 12v 2 led lights led strip drivers 120 driver 1800 2 led lights led strip drivers 120 driver 12v 2- LED strip PIR switch 12-24V, max. 72W
- 12-24 Volt
- max 30/60W, 2.5A
- adjustable dimming level
- to be used with non-dimmable driver
- to be soldered between led strip and driver
- CCT LED strip SET 2 meters - working areas TUNNELMA, white colour temperature adjustable, 14,4W/m, 24V
- 2 meter ready made fixture
- good for work light and atmosphere creation
- double strip (two strips side by side)
- incl driver and wireless control
- incl suspension wires
- CCT LED strip SET 1,5 meters - working areas TUNNELMA, white colour temperature adjustable, 14,4W/m, 24V
- 1,5 meters ready made fixture
- good for work light and atmosphere creation
- double strip (two strips side by side)
- incl driver and wireless control
- incl suspension wires
- CCT LED strip SET 1 meter - working areas TUNNELMA, white colour temperature adjustable, 14,4W/m, 24V
- 1 meter ready made fixture
- good for work light and atmosphere creation
- double strip (two strips side by side)
- incl driver and wireless control
- incl suspension wires
- LED strip DOOR switch 12-24V, max. 192W
- 12-24 Volt
- max 192W 24V
- Detection range 1-10cm
- to be used with non-dimmable driver
- to be soldered between led strip and driver
- LED strip WIRE DC-DC DIMMER 12-24V WHITE
- 12-24 Volttia
- max 144W
- long press dimming
- recommended to be used with TRIAC drivers
- Installed between driver and led light
- LED strip WIRE DC-DC DIMMER 12-24V BLACK
- 12-24 Volt
- max 144W
- long press dimming
- recommended to use with TRIAC drivers
- Installed between driver and led light
- LED strip button DIMMER 12-24V, max. 72W
- 12-24 Volt
- max 72W
- Dimming with long press
- Max profile height 12mm
- Soldered inside Led strip profile
- LED strip TOUCH DIMMER 12-24V, max. 72W
- 12-24 Volt
- max 72W
- Dimming with long touch
- blue light with button
- Soldered inside Led strip profile
- LED strip LIGHT SENSOR switch 12-24V, max. 72W
- 12-24 Volt
- max 72W
- Turns the led light on when it gets dark
- adjustable Lux level
- Soldered inside Led strip profile
- Ceiling/wall Mount Zigbee PIR sensor + Light Sensor
- Zigbee sensor for dry rooms on the wall or ceiling
- Does not include a lamp
- Recessed
- Good detection radius
- Various adjustments
- LED strip CCT control and dimming 12-24V, max. 192W for aluminium profile installations
- 12-24 Volt
- max 192W
- Dimming and CCT adjust with wave of hand
- blue/orange light to show current operating mode
- Soldered inside Led strip profile
- Motion PIR sensor switch with light level sensor, for recessed installation, IP20
- motion sensor with light detection
- doesn´t include light source
- recessed mounting, preferably to AP7 installation box
- wide sensor range
- diverse adjustable
- LED receiver set 12V-24V for dimming led strips, 1x10A
- A simple control set for dimming
- installed between light and driver
- included in the set are a controller and a remote control
- note that they are a bundle product and that they wont work separately with either RF or Zigbee
- LED light bar 120W, combo of 90° and 8°, 6000K, IP68, 12-24V
- for additional work lighting
- powerful daylight led
- LED light bar 240W, combo of 90° and 8°, 6000K, IP68, 12-24V
- for additional work lighting
- powerful daylight led
- LED receiver set 12V-24V for CCT led strips, 2x5A
- A simple CCT control set
- installed between light and driver
- included in the set are a controller and a remote control
- note that they are a bundle product and that they wont work separately with either RF or Zigbee
- LED WALKER, recessed wall light with PIR and light sensor, 230V, 1W, 3000K, IP20
- Recessed inside wall
- installation box included
- IP21
- requires 55mm depth with driver
- always active dark and motion sensor, sensitivity not adjustable
- LED WALKER, recessed wall light with PIR and light sensor, 230V, 3W, 3000K, IP55
- Recessed inside wall
- easy to install
- IP55
- requires 50mm depth
- works only in dark, motion activated
- Ceiling Mount DALI-2 PIR sensor + Light Sensor
- sensor for motion and light
- recessed
- wide sensor range
- multi sensor for DALI systems
- DOES NOT WORK WITH IOT DALI
37
20
- 5
- 10
- 15
- 20
- 25
- 30
Shop By
Filters
Category
Driver Type
Installation level
Lumen
Mounting Method
Bulb Base
Wireless
Area
Color
Dimming
Shape
Color temperature (K)
Colour rendering (CRI ±3)
Light angle
Voltage (V)
Guarantee (year)
IP Class
Chainable
Adjustability
Compare Products
You have no items to compare.
My Wish List