LED strip close proximity MOTION SWITCH 12-24V, max 72W

Out of Stock
SKU
solder-motion

Motion switch for led strip. Perfect solution for under the cabinet lights in kitchens or other systems with no wall switch (night lights at bedroom, wardrobe lights etc.). Is suitable to be used with strips with voltage: 12-24V. On / off closer than 10 cm sweep.

€25.00
LED strip close proximity MOTION SWITCH 12-24V, max 72W is available to buy in increments of 1

Close proximity motion switch for led stripes. Perfect solution for under the cabinet lights in kitchens or other systems with no wall switch (night lights at bedroom, wardrobe lights etc.). Functions when the motion occurs closer than 10 cm from the switch.

Is suitable to be used with strips with voltage: 12-24V.

With 12V led strips, maximum 96W load and with 24V led strips maximum 192W load (8A).

Installation

Solder between the strip and the driver (12-24V input and 12-24V output).

1. Make sure you use constant voltage driver instead of constant current driver. Have the power off when soldering.

2. Make sure the positive "+" and the negative "-" are correctly connected to led power supply (led driver). Positive and negative cannot be reversed!

If you install motion switch on a led strip inside the profile, you can remove cords from the side of the led strip, so that the soldering connects the switch and the strip next to each other! See video.

Size

Measurements: 10x47mm

More Information
Color Other
Voltage (V) 12, 24
Guarantee (year) 3 years
Model HEILAUTUSkytkin
Watt 96.00
Dimensions 10x47mm
Product height 4.7
Product width 1
Approved CE, RoHS
Energy class A++
Muuta Solder the switch block between strip and driver.
IP Class IP21
Customer Reviews
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
N/A

Ratings & Reviews

Be the first to review this product

© Lamppukauppa Led Store Oy. 2021 All Rights Reserved