Be the first to review this product
LED RGBW STRIP SMD 5050 PERLY, 14,4W/m (72W/5m) 12V, water resistant IP65
This led strip uses RGB circuit with the CRI 83 with (White colour). The led strip is dimmable with dimmable driver and waterproof with a surface that does not turn yellow.
High quality 12V RGB led strip!
This led strip uses RGB circuit with the CRI 83 with (White colour). The led strip is dimmable and waterproof with a surface that does not turn yellow. As a tape, it uses 3M tape that is extra durable and attaches the strip firmly. Led strip 14,4W/m is equivalent to 120cm fluorocent tube, so you'll even save energy!
This strip is mostly used in indirect lighting and for creating different moods. Perfect for spas, bars and terraces, also we have noticed that kids love this. RGB led strip has 14,4W/m and has 60 led circuits on a meter. This makes the light even, if installed in a way you cannot see the light source ie. indirect light. When installed on a profile, there are only visible dots to be seen if looked straight to the light (not visible when installed next to a wall). And as the CRI is 83, which is suitable to be used in homes.
LED strip comes in a 5m roll that can be cut to measure in every 5cm. There are 10 cm of 5 conductor cable in both ends of the strip. We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light strts flickering. There are plugs soldered to both ends of the strip that you can use, but it depends a lot of your desired use if you should use the or not. We will help you to figure out that.
If you have more than 5m of strip, you need to feed the power from both ends to minimize the powerloss. All installations should be made on top of aluminium (ie. aluminium profile), that way the excess heat gets conducted away from led circuit and makes it last longer.
LED strip works well with solar power and in boats and cars, as it is 12VDC you might not even need a driver!
Remember to purchase a driver minimum of 80W for the 5 meter roll that has 5 channels output. At the moment we don´t offer that type of driver.
Light colour temperature of the RGB 12V strip is
RGB (red, green and blue) and neutral white colour (4000K).
|Color temperature (K)||4000|
|Guarantee (year)||3 years|
|Colour rendering (CRI ±3)||82|
|Approved||CE, RoHS, IP65|
|Muuta||3M tape on backside|