LED RGBW strip Chameleon 24V KIT with led strip, transformer, profiles and remote control

Set includes

Set includes 5m of RGB led strip 24V, remote control, transformer 100W, 24V for the strip and 5m of surface mounted aluminium profile. Easy, complete set ready for installation!

High quality 24V RGB led strip!

This led strip uses RGB circuit with the CRI 85 with (white colour). The led strip is dimmable and waterproof with a surface that does not turn yellow. As a tape, it uses 3M tape that is extra durable and attaches the strip firmly.

Lighting

The strip is controlled by a remote, where you can select one of the 10 programmes available. Our favourite program is 7 colour fade, where the light changes calmly from one colour to another.

This strip is mostly used in indirect lighting and for creating different moods. Perfect for spas, bars, lounges and terraces, also we have noticed that kids love this. RGB led strip has 14,4W/m and has 60 led circuits on a meter. This makes the light even, if installed in a way you cannot see the light source ie. indirect lighting. When installed on a profile, there are not visible spots when installed next to a wall. And as the CRI is 85, which is suitable to be used in homes.

Installation

LED strip comes in a 5m roll that can be cut to measure in every 5cm. There are 10 cm of conductor cables in both ends of the strip. Ask us if you need more lenght in the RGB-cable (myynti@ledstore.fi).

We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light starts flickering. There are plugs soldered to the conductors, that you have to cut when mounting to the transformer. When soldering the cut lenghts together, remember to heat the copper spots on the strip to make the tin stick.

All installations should be made on top of aluminium (included on the set), that way the excess heat gets conducted away from led circuit and makes it last longer. The aluminium is easy to cut in desider lenghts with hacksaw or circular saw. The installation clips, plastic cover and endcaps are attached.

LED strip works well with solar power and in boats and cars, as it is 24VDC you might not even need a driver!

Dimming

The strip is controlled by a remote, which uses 3AAA batteries (not included). The remote is easily paired to the RF transformer. You can select any colour you like on the touch wheel and select of the 10 built-in programmes available. You can add up to 6 groups to this one remote. Group is always defined by the amount of transformers.

To product can be seen at our warehouse store. Our favourite programme is 7 colour fade, where the light changes calmly from one colour to another.

This is a perfect solution in places where you have power for the strip but no wall switch ready. With this system, you just hook the RF transformer with the remote and have the wireless button were ever you like. The remote comes with a magnetic stand, which you can also attach with tape or with screws that come along.

Light colour temperature

RGB (red, green and blue) and neutral white colour (4000K).