LED RGB+W 4000K STRIP SOLO, 15W/m (75W/5m) 24V HIGH CRI95 IP65

SOLO family KAMELEONTTI light strip! We use RGB+W 4000K led circuits with a white colour rendering index of 95! This LED strip is an efficient, fully dimmable, non-dimmable strip. Our LED strip is easy to attach with the 3M high adhesive tape included. Other accessories such as driver, regulator, aluminium profile are ordered separately. The LED output power of a five meter roll is 15 W/metre, but the LEDs work at different times. If you install the whole 5 meters, then you will need a 24V driver suitable for at least 75 W RGBW strip. We recommend leaving a 10-15% load margin on the driver. Waterline LED strip.

For stylish playful lighting

Our RGB+W 4000K strip has a light output of 15W (10W RGB + 5W 4000K) /m and has 560 LED circuits per metre!. This power makes the light sufficient for mood lighting.

The RGB LED strip is used in spaces where you want to create a changing atmosphere by changing the colours of the light, but because the strip also has a very high quality white 4000K LED circuit, you can light the space well and see the colours as they are intended. Why? Because the strip has a colour rendering performance of CRI 95!, which is ideal for use in home lighting or any demanding application.

SOLO LED strips are completely dot-free, meaning no traditional dots, and you can use our lowest profiles without seeing LED dots. Application ideas. In living rooms / cinema rooms, a RGB+4000K LED strip can be used to create a stylish atmosphere, for example in a chute in a drop-down sliding door or on a shelf around a sliding door. Lighting shelves and levels with RGB+4000K led strip from different directions also creates an interesting, changing look throughout the room. In children's rooms and bedrooms, RGB LED strip is also a great choice for bringing joy and vibrancy to colour, or alternatively for calm and relaxing lighting with white light. RGB LED strip is also used in bathrooms, courtyards and wet areas as it is waterproof. Always installed on our profiles for better grip and heat management, which are available in a variety of different types.

Installation

SOLO RGB+W LED strip comes in 5m rolls and can be cut to size and soldered every 5cm. We also sell the strip in lengths of your choice (note the cutting spacing!). The tape is clearly marked for easy cutting. There is a 10 cm connection cable (5-conductor, R, G, B, W, +) at each end of the reel. We recommend soldering the new connecting wires after cutting. A carefully done LED strip installation will last for years. The RGB+W-led strip has a calculated lifetime of +35 000 hours when correctly installed. We are happy to help with installation and product selection.

The RGB+W-led strip can be used for example with a VaLO-Zigbee series wireless controller and a 24V driver, which can of course also be controlled by other Zigbee devices (Philips HUE, Conbee2 USB stick, etc..). Of course, you can also buy your own drivers if needed...

We recommend powering from both ends if the strip is installed in a continuous length of more than 10 meters. This prevents light loss and gives an equally bright light from both ends. The LED strip should always be attached to an aluminium strip so that excess heat is conducted away from the LED circuit. This will prolong the life of the strip and keep the warranty valid.

The Led strip works well with 24V systems such as solar power, boats and cars. In that case, a separate power supply is not needed, but a control unit is of course required.

Dimming

To dim the LED strip you can use either a traditional rotary wired dimmer or our VaLO RF series wireless dimmer. When using the rotary conventional dimmer, the driver of the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is supplied with a constant current.

In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use an LED strip only for traditional applications when you can make a light from almost anything? Create your own wall light by bending the LED strip and the aluminium profile into the shape you want, or by fixing the LED strip to another heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we do custom-made LED strip lighting at LedStore's LedShop.

Light colour temperature

RGB (red, green and blue) in all shades + 4000K

Led with or without dots?

SOLO led strip differs from traditional led strip due to the super dense led chip structure. The advantage is no dots and a shorter cut-off interval, compared to the more dotted CAMELEONTTI strip.