LED CCT STRIP SOLO 3,6W/m (18W/5m) 24V, ADJUSTABLE 2700-6500K, IP65

In stock 80
SKU
strip36-24v-cct-solo

Solo 3.6W/m - the color temperature of the strip light can be adjusted between 2700K and 6500K. The strip has a color rendering index of 94-95, which means that colors are reproduced well (colors are best reproduced with 4000K white light, as it does not have a yellow or blue tint). Solo 3.6W/m LED strip is very even and efficient (795 lumens per meter) and has 360 LED chips per meter. This LED strip is dimmable and color-adjustable by ordering the VaLO RF or Zigbee series (CCT) button and receiver (CCT).

This is our lowest power LED strip and its recommended uses are saunas, baseboards, and stairs. These are areas where only mood lighting is needed.

If you want a custom-sized LED strip or a custom-sized profile with your own dimensions, try our custom order calculator! With the calculator, you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/mittatilaus

€89.00
LED CCT STRIP SOLO 3,6W/m (18W/5m) 24V, ADJUSTABLE 2700-6500K, IP65 is available to buy in increments of 1

The Solo 3.6W/m strip light can be adjusted between 2700K and 6500K. The colour rendering index of the strip is 94-95 which means that the colours reproduce well (the best colours reproduce with 4000K white light, as there is no yellowish or bluish tint involved). This led strip is dimmable and the colour control can be operated by ordering a VaLO RF or Zigbee series (CCT) button and receiver (CCT) .

This is our lowest wattage led strip and its recommended applications are Saunas, Staircases and Staircases. In other words, places where only ambient light is sufficient. As this is also a waterproof Led strip IP65, you can also use it outdoors.

If you want a custom made Led strip or a custom made profile with your own dimensions, try our custom made calculator!
With the calculator you can calculate the price for different needs with wireless control or ON/OFF use. For one or more levels!
https://ledstore.fi/mittatilaus

Product information

The Solo 3,6W/m strip is very uniform and efficient (350 lumens per meter) and has 360 LED circuits per meter. This makes the light even. The width of the LED strip is 12mm which provides a really good soldering space for the spacers and a gripping surface, as well as heat dissipation.

Installation

The LED strip comes in 5m rolls and can be cut to size up to 50mm apart. The strip comes with 10cm of splicing wire pre-wired at both ends. Red wire is +, white is C cold white and yellow is W warm white. Our Led strip is easy to attach with the included 3M high adhesive tape. The cut points can be found on the underside of the strip under the tape. The cutting points have copper dots, so you can solder a low-current wire to the strip from these points to connect to the driver. We recommend soldering the tapes together. When soldering, use a knife to remove the silicone coating that protects the strip at the copper points.

We recommend that for long runs (over 10m) the driver supply is branched at both ends of the LED strip to avoid light degradation at one end of the strip. The led strip should always be attached to an aluminium strip so that excess heat is conducted away from the led circuit. This will prolong the life of the led strip. Aluminium profiles can be ordered from our online shop, where we have a wide range of different profiles available.

The CCT led strip is connected to a CCT adjustable driver (RF or Zigbee) or, in larger installations, to a separate control unit, and the control unit is connected to a power supply which is connected to the mains.

The LED strip works well with solar power, boats and cars if they use 24VDC. Then a separate power supply is not needed. In other cases, order a 24V power supply of suitable power for the strip. The power supply does not need to be dimmable when dimming with a regulator and receiver. Alternatively, a wireless control RF or Zigbee driver is available, where the driver is paired directly with the wireless button.

We are happy to help with installation and ordering questions.

.

To dim the LED strip, you can use the wireless dimmer of our VaLO RF series. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the light, but the light is powered by a constant current.

In the case of a smart home, a Zigbee driver and controllers for wireless control are chosen. In Zigbee drivers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.

Create your own light

Why use CCT LED strip only for traditional applications when you can make a light out of almost anything? Create your own wall light by bending the LED strip and the aluminium profile to the shape you want, or by fixing the LED strip to another heat-conducting material. Turn a mirror, table frame, trunk, table or chair into a lamp with the LED strip. A good design is half the job. We are happy to help you with your design, and we make LED strip made to measure at LedStore's LedShop.

More Information
Guarantee (year) 3 years
Colour rendering (CRI ±3) 95
Model strip36-24v-cct-solo
Lumen 1,750.00
Voltage (V) 24
Color temperature (K) Adjustable CCT
Light Adjustment CCT
Adjustability Adjustable
Watt 18.00
Lifespan 50000
Dimensions 12x2x5000
Product height 500
Product width 1
Product depth 0.2
Approved CE, RoHs, IP65
Energy class B (185lm/W)
Muuta CCT adjustable
IP Class IP65
Customer Reviews
Customer Questions
No Questions
Did you find what you were looking for?

For the CCT ability to work, you need a wireless button and a receiver.

LED strip comes in a 5m roll that can be cut to measure in every 5cm. We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light starts flickering.

If you have more than 10m of strip, we recommend thta you to feed the power from both ends or from the centre to minimize the powerloss. All installations MUST be made on top of aluminium (ie. aluminium profile), that way the excess heat gets conducted away from led circuit and makes it last longer.

LED strip works in boats, as it is 24VDC you might not even need a driver!

Remember to order a driver (unless it is for a boat, car or with solar power of 24VDC).

Ratings & Reviews

Be the first to review this product

We found other products you might like!
© Lamppukauppa Led Store Oy. 2022 All Rights Reserved